Advertisement
PC-W150 B/E/G/GI
Cassette holder (Deck A)
LOCATION OF CONTROLS
> eirertarilr ee dieres
8 FM STEREO indicator
POWER indicator
@ Dial scale
TUNING knob
FINE TUNING knob
Cassette holder (Deck B)
Cassette operation buttons (Deck A)
O REC button
® PLAY button
<4 REW button
PP FF button
B /* STOP/EJECT button
§§ PAUSE button
: 5-BAND GRAPHIC EQUALIZER controls
Cassette operation buttons (Deck B)
® PLAY button
44 REW button
PP FF button
@ /2STOP/EJECT button
POWER switch
MIC jack (3.5 mm dia. mini)
CD IN jacks
DIN jack (REC/PB) (PC-W150G
only)
SPEAKER terminals
FM MODE/BEAT CUT switch
Battery compartment cover
AC IN jack
DC IN 12 V jack (--®-+)
(PC-W150E
only)
PHONES jack (3.5 mm dia. stereo mini)
Telescopic antenna for FM and SW reception
VOLUME
control
FUNCTION switch
@ BAND switch (FM/SW/MW/LW)
@ TAPE (PLAY) switch
Set this switch according to the type of tape to be
used.
-m=. METAL/CrO2:
(playback only)
Set to this position to listen to a metal (type
IV) or chrome (type Il) tape.
4a NORMAL:
Set to this position to listen to a normal (type
1) tape.
© POWER indicator
Lights when Power switch is ON.
@ FM MODE/BEAT CUT switch
FM MODE
— Stereo (ST):
Set to this position when listening to or recording
an FM stereo broadcast.
FM MODE — MONO:
Set to this position when FM stereo reception is
obscured by noise.
BEAT CUT:
Usually set to 'NORM
1" position.
Beats which may occur while recording an AM or
SW broadcast can be eliminated by changing the
position of this switch.
@ FUNCTION switch
CD IN (CD IN/DIN: PC-W150 G only)
Set to this position when listening to or
recording from the source connected to
the CD IN (or DIN) jacks.
TUNER
—Set to this position when listening to or
recording from the radio.
TAPE-HIGH SPEED DUBBING
Set to this position
when
dubbing
at
high-speed.
TAPE-NORMAL SPEED DUBBING
Set to this position when listening to a
cassette or recording using the external
microphone; also set to this position when
dubbing at normal speed.
, Wages
nn00000
(No. 1785)
5
Advertisement
