Advertisement
m@ TROUBLESHOOTING
Cause
|
Power does not turn on.
Fuse is blown.
Replace with a fuse of the same amperage as the old fuse.
Measure
Sound quality is poor.
Use a cleaning tape, etc. to clean the head.
Turn the unit off, first.
Remove ali connecting wires from the power ANT lead, and
turn the unit on, then re-connect a wire one by one to the
power ANT lead.
When sound is muted again, check the unit with a wire con-
nected last.
Playback head is dirty.
Power ANT lead is shorted
to the ground.
No sound while unit can
be operated.
This unit is equipped with a number of self-diagnosis functions to protect the system. if a problem should be occur, the user
is warned throurh various error displays. Eliminate the problem using the procedures shown below.
Error display
_ Procedure
This indicates that a problem has occured with the CD changer's mechanism (disc cannot be
changed or.ejected, etc. ) -
~The CD changer mechanism is likely damaged.
Er6
This indicates that the CD's TOC (table of contents) cannot be read, for example because the
selected disc is upside-down.
This is displayed if a cassette tape gets stuck during loading or ejecting.
Remove the cause for which the cassette tape got stuck.
if a display other than one of the displays avobe appears, press the reset button.
-
-3-
ARX5370R
Advertisement
