Setting The Impeller Stopping Delay; Wiring Of Printed Circuit Board Inputs/Outputs - Lincoln Electric MODULO MD2 Safety Instruction For Use And Maintenance

SETTING THE IMPELLER STOPPING DELAY

WIRING OF PRINTED CIRCUIT BOARD INPUTS/OUTPUTS

ENTREES
INPUTS:
- Wire the DC current clamp - W000380662 at 1 / 3
Wire the AC/DC current sensorW000379696 (optional) at1 / 2 / 3
-
- Wire the external dry contacts at 1 / 3
OUTPUTS :
Wire the dry contacts at NC/COM or at NO/COM as needed
-
-18
In Automatic mode, the impeller is supplied with a
stopping delay of 45 seconds after the electric arc
goes off.
That delay can be increased (anticlockwise) or
decreased (clockwise) from 2 seconds to 9 minutes
SORTIES
8695 8467 / C
MODULO MD2