Connecting A Camcorder - Toshiba 43H71 Owner's Manual

Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another TV channel.
You will need:
• one coaxial cable
• two pairs of audio cables (two single audio cables for mono
VCRs)
• two video cables (two S-video cables for S-VHS VCRs)
VCR1
From Antenna
TV
VCR2
Caution:
The unauthorizedrecording of television
programs, videotapes,and other materials
may infringe upon the provisions of copyright
laws.
Note:
If you have S-VHS VCRs, use S-video cables
instead of regularvideocables. D onot
connect b otha regularvideocableandan
S-videocableto Video- 7 (or Video-2) a t the
sametime.
Donot connectthesame VCR to the
output
and
input jacks on
the TVatthesametime.
Todub
or edit,
VCR2 mustselect L ine
IN,
and the TVmustselectVideo- 7 .
* TheVideo
OUT jack
doesnot
output
the
PIPpicture.
** The Audio OUT jackscanoutputthesound
of eithertheMainor PIPpicture(see
"Selecting t heAudio OUTsound"onpage
45).
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one pair of audio cables
• one video cable (one S-video cable for an S-VHS camcorder)
Caution:
Ifyou have an S-VHS camcorder, use an
S-video cable instead of a regular video cable
for improved picture quality.
Video-3 (front panel)