Connecting A Dvd Player Or Satellite Receiver And A Vcr - Toshiba 43H71 Owner's Manual

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one TV channel while watching another
channel.
You will need:
• one coaxial cable
• two pairs of audio cables (one single and one pair of audio cables
for a mono VCR)
• one video cable (between the TV and VCR)
• one S-video cable (between the TV and DVD player/satellite
receiver)
Stereo VCR
From
Antenna
TV
Note:
For the highest possible picture quality from a
non-ColorStream DVD player/satellite
receiver, use an S-video cable between the
TV and DVD player/satellite receive£ (If your
DVD player or satellite receiver is
ColorStream-compatible, see page 8).
Do not connect both an S-video cable and a
regular video cable between the TV and DVD
player/satellite receiver at the same time.
Doing so will distort the picture.
Do not connect the DVD player/satellite
receiver and VCR to the same video channel
on the TV (See the illustrations, which show
the DVD player/satellite receiver connected to
Video-7 on the TVand the VCR connected to
Video-2 on the TV)
Caution:
The unauthorizedrecording of television
programs, videotapes,and other materials
may infringe upon the provisions of copyright
laws.
IIIIIIIIIIIIL,,,,IIIIIIIIIIIIII
From
Satellite
Dish
DVD/Player
Satellite Receiver
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
7