Toshiba 43H71 Owner's Manual page 9

Connecting a DTV receiver/set-top box with
component video and a VCR
This connection allows you to watch DTV (digital TV broadcast),
VCR, and TV programs, and record DTV and TV programs. You can
record from one source while watching a program from another
source.
Your TV has ColorStream (component video) inputs. Connecting
your TV to a component video-compatible DTV receiver can greatly
enhance picture quality and realism.
You will need:
• one coaxial cable
• three pairs of audio cables (two single and one pair of audio
cables for a mono VCR)
• two video cables
• one set of ColorStream (component video) cables (one S-video
cable for a non-ColorStream DTV receiver; see notes at right)
From
antenna
From DTV
antenna
Stereo VCR
TV
Note:
For the highest possib/epicture qua/is use
ColorStream (component video) cables
between the TVand DTV receiveL Youcan
connect the ColorStream cables from the
DTV receiver to either ColorStreamjack on
the TV(HD1 or HD2).
The ColorStream HD 1and HD2 jacks can be
used with Progressive(480p) and Interlace
(480_ 10800scan systems.
ffyour DTV receiveris not ColorStream-
compatible, use the S-video connections
(both audio and video) instead of the
ColorStream connections.Do not connect
both S-video and ColorStream cables
between the TVand DTV receiver at the same
time.
Torecord from the DTV receiver,set the VCR
to Line IN. Tomonitor recording from the DTV
receiver,set the VCR to Line IN, and set the
TVto Video-1.
Caution:
The unauthorizedrecording of television
programs, videotapes,DVDs, and other
materials may infringe upon the provisions of
copyright laws.
IIIIIIIIIIIIL,,,,IIIIIIIIIIIIII
DTV receiver with component video
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
9