Table of Contents
Advertisement
Using
the StableSound
TM
feature
When
the signal source is changed,
the stable sound
feature limits the
high volume level to prevent extreme changes in volume. For
example,
this will prevent the sudden increase in volume that often
happens when a TV program switches
to a commercial.
To turn on the StableSound
feature:
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight STABLE SOUND.
3. Press • or • to select ON.
@@@®@@
AUDIO
_BS
ON
SBS
LEVEL
80
SPEAKERS
ON
Note:
When the Stab/eSound rMfeature is
on, the SRS 3D surround sound
feature is automatically
turned off
(see page 4 3).
CABLE
M TE
VCB
U
TVNIDEO
TIMER
® ® @
®
®®®N
®®
® ® N
--RECALL
Selecting
the background
of the menu display
You can change the background of the menu display by selecting from
two preset types: shaded and solid (gray).
To select the background:
1. Press MENU, and then press • or • until the CUSTOM
menu
appears.
2. Press • or • to highlight BACKGROUND.
3. Press • or • to select either a SHADED
or SOLID background.
@@@®@@
CUSTOM
TIMER
000
CC
C 1
FAVORITE
CH1
I_
FAVORITE
CH2
_"
Displaying information on-screen
Press RECALL to display the following information
on-screen:
• Antenna mode (when in TV mode)
• Channel number or VIDEO mode selected
• Time (if set)
• Channel label (if set)
• Stereo or SAP audio status
• V-CHIP rating status
STEREO
SAP
TV
- PG
L
V
ANT
1
ABCD
9:25
CABLE
6
Advertisement
Table of Contents
