Adjusting The Color Convergence - Toshiba 43H71 Owner's Manual

Adjusting the color convergence
This projection TV uses three separate TV tubes: red, green, and blue.
The red, green, and blue images are projected onto the screen where
they converge to form a full-color picture. You can see a dear picture
only when the three images converge correctly. Convergence may drift
over time or if you move the TV. If you can see clear images on your
TV screen, skip this procedure.
Make this adjustment only after the TV has been on for at least 30
minutes.
To use the TOUCH FOCUS (auto-convergence) button:
Press TOUCH FOCUS on the TV once. The TV will enter the
auto-convergence mode and adjust the convergence
automatically.
TOUCH FOCUS
Horizontal
IB t;G tlR
TOUCH FOCUS FINISHED
Vertical
When the adjustment is complete, the normal picture reappears.
If the error message "Touch Focus Error" appears, retry the
TOUCH FOCUS adjustment or adjust the convergence
manually, as described below.
To check and adjust the color convergence manually:
1. Press MENU, and then press • or _ until the PICTURE menu
appears.
2. Press • or • to highlight CONVERGENCE.
®O®®@®
PICTURE ANTENNA
MODE SPORTS
FLESH TONE ON
DNR OFF
CINEMA MODE FILM
COLOR
43H71
CH•
T _ _ _ i_ _MENU VOL, _,VOL EXIT TV/VIDEO TCUCHFOCUS
MENU AT, II.- TOUCH FOCUS
53H71/61 H71
=CH
MENU EXiT TVN[DEO TOUCH FOCUS
MENU J,_!', I1.- TOUCH FOCUS
000_
0 O0-0
000
o o o_
MENU
_i_!i_!_
iHHH ili 'iii il 'ii i 'ii 'i
iiiiiiii
21