Yamaha S70XS Owner's Manual page 51

LCD Indication
Load All. Are you sure?
Load Seq Chain file. Are you sure?
MIDI buffer full.
MIDI checksum error.
Mixing Voice full.
No read/write authority to the file.
Now executing Factory set...
Please keep power on.
Now loading...
Now receiving MIDI bulk data...
Now saving...
Now scanning autoload file...
Now transmitting MIDI bulk data...
Overwrite. Are you sure?
Part x is used for Drum Assign.
Part x is used for Layer.
Part x is used for Split.
Please stop Audio Play/Rec.
Please stop sequencer.
Save Audio Rec file?
Seq Chain stored.
Sequence memory full.
Set Part 1 Ins Sw to on to use Vocoder.
MIDI data overload.
Store Voice?
The received MIDI bulk data's type is not
compatible with the current mode/voice
type.
This Performance uses User Voices.
USB connection terminated.
Press any button.
Utility stored.
Confirms whether you want to load the "All" or not in the File mode.
Confirms whether you want to load the "Seq Chain file" or not in the File mode.
Failed to process the MIDI data because too much data was received at one time.
An error occurred when receiving bulk data.
The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the
maximum capacity.
No permission for reading/writing on the external storage device.
Indicates this synthesizer is restoring the factory-programmed settings.
Indicates that a file is being loaded.
Indicates this synthesizer is receiving MIDI bulk data.
Indicates that a file is being saved.
Scanning for the files specified for Auto Load.
Indicates this synthesizer is transmitting MIDI bulk data.
A save operation will overwrite data on the external storage device as destination, and this message
confirms whether it is OK to continue or not. Press [ENTER] (Yes) or [EXIT] (No) as required.
This message appears when the Part switches of all Parts are set to on, and the Drum Assign function
used Part "x" for the Drum Part in Performance mode.
This message appears when the Part switches of all Parts are set to on, and the Layer function used
Part "x" for the Layer Part in the Performance mode.
This message appears when the Part switches of all Parts are set to on, and the Split function used
Part "x" for the Split Part in the Performance mode.
The operation you have attempted to execute cannot be done during Audio Rec/Play recording or
playback.
The operation you have attempted to execute cannot be done during SEQ PLAY playback.
Confirming whether you want to save the recorded file or not in Audio Rec/Play mode.
This message appears when the Seq Chain settings has been stored.
The internal memory for Sequence data is full, preventing any further operation (such as recording,
editing, Job execution, MIDI reception/transmission, or loading from the external storage device).
Try again after erasing unwanted Song, Pattern, or User Phrase data.
Set the Insertion Switch of Part 1 to on to use the Vocoder when setting the Output Select of the A/D
Input part to "Vocoder."
The amount of MIDI data is too large to play.
Confirms you want to store the editing Voice when executing the Performance Creator (Layer/Split/
Drum Assign) feature to the editing Voice in the Voice mode.
This message appears when MIDI bulk data is received in a different mode other than the currently
selected mode. The bulk data is received in the same mode as the transmitting mode. This message
also appears when the Voice type (Normal Voice/Drum Voice) of the destination Mixing Parts is
different from the bulk-dump-transferred Voice type. The destination Parts assigned to the same Voice
type as the bulk-dump-transferred Voice type are selected.
The loaded Performance uses User Voices. Confirm whether the same Voices as at the time of saving
are stored at the same User Bank/Number or not.
A break in the connection with the USB storage device has occurred because of an abnormal electric
current. Disconnect the USB storage device from the USB TO DEVICE connector, then press any of
the panel buttons.
The settings in the Utility mode have been stored.
Description
S90 XS/S70 XS Owner's Manual
Display Messages
51