Yamaha S70XS Owner's Manual page 44

Using as a Master Keyboard (Master Mode)
3
Press the [EDIT] button.
The Master Edit Select display appears.
4
Select "Common" then press the [ENTER]
button.
The Common Edit display appears.
5
Select "Zone Sw" then press the [ENTER]
button.
The Common Zone Switch display appears.
6
Set "Zone Switch" to "on."
The "Knob/Slider" parameter also will be set to on
automatically.
NOTE
When using the Knobs/Sliders as the controller of the Knob
Function/Slider Function, set the Knob/Slider to off.
7
Press the [EXIT] button twice to return to the
Master Edit Select display.
44
S90 XS/S70 XS Owner's Manual
8
Select "Zone 1" by using the cursor buttons
then press the [ENTER] button.
The Zone Edit Select display appears.
9
Make the settings of the Zone 1 in the
respective Transmit, Note, Preset and Knb/
Sldr displays.
Transmit display
Note display
Preset display
Knob/Slider display
10
Press the [EXIT] button to return back to the
Master Edit Select display, then set the
other Zone using this same operation.
11
After setting all the desired parameters,
press the [STORE] button to store your
settings as a Master program.
After completing these settings, assign a name to the
Master in the "Name" parameter of the Master Common
Edit display. After naming, press the [STORE] button to
store the Master.