Siemens SINUMERIK 840D sl Equipment Manual page 44

General information and networking
4.3 Networking
Figure 4-5
The main menu contains:
• A "Main menu" title followed by the TCU name in brackets
• A central area listing the servers from config.ini. This is followed by two more fixed items,
"Select service session" and "Service this panel".
– The penultimate menu item, "Select service session", triggers a server scan which detects
– The last menu item on the main menu, "Service this panel", opens the "Service menu for
• The right-hand side of the menu has a column containing 8 softkeys for use on a context-
specific basis.
• The lower section of the menu has a row of 4 softkeys for navigating with the cursor.
• There is an error line for displaying error messages directly above the row of softkeys.
Transient status messages also occasionally appear in this line.
• There is a further message line above this error line. The contents of this line can be set from
the servers using HWS commands.
44
TCU menu: Main menu
all the VNC servers in the local (system) network. These are then displayed in a session
menu which largely reflects the main menu.
operator panel" submenu.
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA