Panasonic Lumix H-ES12035 Service Manual page 11

6.1.8. Removal of the Main PCB Assy
1. Disconnect the connector (B) ～ (E).
2. Remove the Main PCB with the Mount Contact Unit.
6.1.9. Removal of the Mount Contact Unit
and the Floating Rubber
1. Disconnect the connector (F).
2. Remove the Mount Contact Unit.
3. Disconnect the 4 Floating Rubbers.
6.1.10. Removal of the Hold Barrel Unit
1. Remove the screw (H) and the Zoom Lever.
Screw (H)
Screw (H) ： 5.5mm (Silver)
and Zoom Lever
2. Remove the 4 screws (I) and the 2 screws (J).
Screw
Screw (I) ： 5.0mm (Silver)
Screw (J) ： 2.5mm (Silver)
3. Rotate Zoom Ring to fully (A) direction, then lift
and remove it.
4. Gently lift the Flexible Guide with Flex. Cable.
9
(I)
Screw (J)