Winch ready front bumper for 2007 - current wrangler (jk) (5 pages)
Summary of Contents for Tactik 13117.0110
Page 1
Installation Manual: for ’07- Current Jeep Wrangler JK 13117.0110 and 13117.0200 PARTS LIST: Headlight Euro Guards - QTY 2 REQUIRED TOOLS: REQUIRED TOOLS: Safety Glasses T15 Torx Head Screwdriver Small Flat Blade Screwdriver Phillips Head Screwdriver READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL THIS PRODUCT.
Page 2
Step One: Preparing to Install Figure 1 Figure 2 Put on safety glasses. Open the hood of Locate the six plastic fasteners that your Jeep . Put the prop rod into the secure the front grille to the upper ® correct slot to hold hood open (Fig 1).
Page 3
Guards are installed. If you plan to in step 3, partially reinstall each screw install Turn Signal Euro-Guards TACTIK ® into the 3 alignment tabs (Fig 10). we recommend installing them at this Do not tighten yet. Starting from left to...
TACTIK inspection and at ® Warranty. TACTIK’s option, be either repair or replace- ment of product or parts (new or refurbished) What is Covered: Subject to the terms, exclu- covered under this Limited Warranty. sions and limitations herein and with respect...
Need help?
Do you have a question about the 13117.0110 and is the answer not in the manual?
Questions and answers