Connecting A Footswitch/Foot Controller - Yamaha PSR-S710 Owner's Manual

Connecting a Footswitch/Foot Controller

Optional footswitches (Yamaha FC4 or FC5) and an optional Foot controller
(Yamaha FC7) can be connected to one of the FOOT PEDAL jacks. A footswitch
can be used for switching functions on and off, while a foot controller controls
continuous parameter such as volume.
Default functions
FOOT PEDAL 1 Switches sustain on or off. Use the FC4 or FC5 footswitch.
FOOT PEDAL 2 (PSR-S910) Controls the Super Articulation Voices
(page 33). Use the FC4 or FC5 footswitch.
(PSR-S710) Controls the volume (expression function). Use
the FC7 foot controller.
By assigning the function for each foot switch/controller, you can conveniently
control sustain and volume with either pedal jack or control many other functions by
pedal.
• Example: Controlling Song Start/Stop by footswitch
Connect a footswitch (FC4 or FC5) to one of the FOOT PEDAL jacks.
To assign the function to the connected pedal, select "SONG PLAY/PAUSE" in the
operation display: [FUNCTION] → [D] CONTROLLER → TAB [E][F] FOOT
PEDAL.
Advanced Features
Refer to the Reference Manual on the website, Chapter 10.
Assigning specific functions to each
foot pedal:
FC4 FC5
[FUNCTION] → [D] CONTROLLER → TAB
[E][F] FOOT PEDAL
CAUTION
Make sure to connect or discon-
nect the pedal only when the
power is off.
FC7
PSR-S910/S710 Owner's Manual
10
93