Connecting a Microphone or Guitar
By connecting a microphone or guitar to the [MIC/LINE IN] jack (standard 1/4"
phone jack), you can enjoy singing along with your own performance or playing
guitar along with Song playback. The instrument outputs your vocals or guitar
sounds through the built-in speakers. The following instructions show how to
connect a microphone. Please note that when connecting a guitar or other devices of
high output level, make sure to set the [LINE MIC] switch to "LINE."
1
Set the [INPUT VOLUME] knob to the minimum position.
2
Connect the microphone to the [MIC/LINE IN] jack.
3
Set the [LINE MIC] switch to "MIC."
4
(For microphones having a power source, turn on the power
first.) Adjust the [INPUT VOLUME] knob while singing into the
microphone.
10
Adjust the control while checking the SIGNAL lamp. Make sure to adjust the
control so the lamp lights in green or orange. Make sure that the lamp does not
light in red, since this indicates that the input level is too high.
Make sure lamp does
not light in red.
Disconnecting the microphone
1. Set the [INPUT VOLUME] knob to the minimum position.
2. Disconnect the microphone from the [MIC/LINE IN] jack.
90
PSR-S910/S710 Owner's Manual
NOTE
Make sure you have a conventional
dynamic microphone.
NOTE
Always set the INPUT VOLUME to
minimum when nothing is connected
to the [MIC/LINE IN] jack. Since the
[MIC/LINE IN] jack is highly sensi-
tive, it may pick up and produce noise
even when nothing is connected.
3
NOTE
Set the [INPUT VOLUME] knob to the
minimum position before turning off
the power.