Restoring The Factory-Programmed Settings - Yamaha PSR-S710 Owner's Manual

3
Press the [2 ▲▼] – [6 ▲▼] and [7 ▲] buttons, corresponding to
the character you wish to enter.
To actually enter the selected character, move the cursor or press another letter-
input button. Alternately, you can wait for a short time and the characters will be
entered automatically.
For details on entering characters, refer to "Other character-entry operations"
below.
4
Press the [8 ▲] (OK) button to actually enter the new name and
return to the previous display.
Other character-entry operations
• Deleting characters
Move the cursor to the character you wish to delete by using the [DATA ENTRY]
dial, and press the [7 ▼] (DELETE) button. To delete all characters on the line at
once, press and hold the [7 ▼] (DELETE) button.
• Entering marks or space
1. Press the [6 ▼] (SYMBOL) button to call up the mark list.
2. Use the [DATA ENTRY] dial to move the cursor to the desired mark or space, then
press the [8 ▲] (OK) button.
• Selecting custom icons for files (shown at left of file name)
1. Press the [1 ▼] (ICON) button to call up the ICON SELECT display.
2. Select the icon by using the [A] – [J] buttons, [3 ▲▼] – [5 ▲▼] buttons or [DATA
ENTRY] dial. The ICON display includes several pages. Press the TAB [E][F]
buttons to select different pages.
3. Press the [8 ▲] (OK) button to apply the selected icon.

Restoring the Factory-programmed Settings

While holding the C6 key (right-most key on the keyboard), turn the [STANDBY/ON]
button ON. This restores the all settings (except Internet Settings, etc.) to the factory
default.
You can also restore a specified setting to the factory default value, or save/load your
own reset settings. Call up the operation display: [FUNCTION] → [J] UTILITY →
TAB [E][F] SYSTEM RESET. For details, refer to the Reference Manual on the
website.
C6
NOTE
The file name can contain up to 41
characters and the folder name can
contain up to 50 characters.
NOTE
When entering a password for a web-
site or the WEP key for wireless LAN
connection, the characters are con-
verted to asterisks (*) for security pur-
poses.
NOTE
To cancel the character-entering oper-
ation, press the [8 ▼] (CANCEL) but-
ton.
NOTE
To cancel the operation, press the
[8 ▼] (CANCEL) button.
NOTE
If you want to initialize only the Regis-
tration Memory setting (page 71),
turn the [STANDBY/ON] button on
while holding the B5 key.
NOTE
To reset the Internet Settings, call up
the operation display: [INTERNET] →
[5 ▼] SETTING → [A] NETWORK
SETTINGS → [E] INITIALIZE SET UP.
PSR-S910/S710 Owner's Manual
27