Functions - Breville Smart Air Viral Protect Max Instruction Book

Functions

OPERATING YOUR AIR PURIFIER
1. Press the POWER button to turn on and
the control panel will illuminate.
2. The air quality sensor light will illuminate,
usually starting with a blue light until it has
time to sense the air quality, and then it may
change to an alternate colour.
NOTE
On first use, the purifier will begin in
Auto mode.
3. The air purifier will begin operation in the
last mode selected, except for timer and
night modes.
4. To adjust how the air purifier operates,
follow the directions below.
Real Time Displays to auto adjust
performance
• Your Breville Purifier has a built-in air quality
sensor to detect changes to air quality in the
surrounding area.
• SensAir Laser System™
Dual display with real time updates via
PM2.5 Micron Monitor & Live Colour Visual
Indicator, auto adjusts the performance
according to air quality detected.
• Laser Sensor Technology uses LED light
source, and the sensor generates heat
through resistance to bring air into the
detection field. It intelligently detects finer
particles as small as 0.3 microns.
Grade Air Quality
1 Very Good
2 Good
3 Fair
4 Poor
* Air Quality Index.
AQI* Measured Colour
in PM2.5 of Light
< 33 Blue
34–66 Yellow
67–99 Orange
> 100 Red
Microbe Shield
TM
• Press the
Microbe Shield
turn on. The Microbe Shield
illuminate.
• Press the
button again to turn off this
function.
Night Mode
• Press the
button to turn on night mode.
The button will flash.
• After 5 blinks, all indicator lights on the
control panel, except the
off as the unit enters night mode and the fan
speed will automatically change to Low.
• Press any button except the Power button
on the control panel to re-engage the control
panel and turn off night mode. The
light will extinguish.
Ambient Light Sensor
• The ambient night sensor will detect the
brightness of the surrounding and will
automatically dim the control panel if the
surrounding is dark.
button to
TM
button will
TM
button, will turn
button
9