Care, Cleaning & Storage - Breville Smart Air Viral Protect Max Instruction Book

Care, Cleaning
& Storage
The air purifier and AntiViral filter should be
cleaned at least once a month. Ensure the air
purifier is switched off and disconnected from
the power outlet and allow all parts to cool
before cleaning or storing.
• Use a clean, dry cloth to clean all external
surfaces of the air purifier.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
• Always ensure the air purifier is turned
off, switched off at the power outlet and
unplugged and allow the unit to cool before
performing any cleaning, filter or UV-C
replacement.
8
DO NOT stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
8
DO NOT use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
8
NEVER use alcohol or other solvents
on this unit.
FILTER CARE & CLEANING
WARNING
The filter is not washable. Do not immerse
any part of the air purifier in water as it will
cause damage.
• The Pre-filter should be cleaned at least once
a month using a vacuum cleaner. Gently
vacuum using a hand-tool attachment such
as a brush or upholstery tool. Clean more
often if required.
• Do not attempt to clean the carbon filter with
a vacuum as this can cause damage.
14
• Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
can cause damage.
• Replace the filter as indicated using the
following instructions.
REPLACING THE FILTER
Your Breville Purifier AntiViral Filter should be
replaced in the time frames indicated below.
The Filter Reset
The purifier has a helpful filter replacement
reminder to alert when the filter needs changing.
• The filter life is approximately 12 months based
on 12 hours daily operation or 4320hrs.
• The filter life will vary based on environment
conditions and more frequent change is
required. For optimal performance change filter
every 6 months.
• Remove all packaging from the replacement
filter and place the filter into the unit as
described below:
1. With the purifier in an upright position, slide
the toggle located on the base to the right to
unlock.
2. Using both hands, lift the body of the purifier
off the base using the handles provided, and
place the body aside. The filter will remain in
position.
3. Remove the used filter, being careful that any
residue or debris that may fall from the filter
will not cause damage.
4. Place the replacement filter on to the base,
ensuring that it is correctly centred and all
packaging has been removed.
5. Replace the body of the purifier back onto
the base.