Download Print this page

Functions - Breville Smart Air Plus Instruction Book

Hide thumbs Also See for Smart Air Plus:

Advertisement

Functions

OPERATING YOUR AIR PURIFIER
1. Press the
POWER button to turn on and
the control panel will illuminate.
2. The air quality sensor light will illuminate,
usually starting with a blue light until it has
time to sense the air quality and then it may
change to an alternate colour.
3. The air purifier will begin operation in the
last mode selected (excluding Night mode
and timer).
4. To adjust how the air purifier operates,
follow the directions below.
NOTE
The replace filter icon will illuminate indicating
that the filter needs to be replaced. To reset
the indicator after the filter has been replaced,
press and hold the
POWER button for 5
seconds.
SensAir
LIVE PURITY CONTROL
TM
• Your Breville Smart Air Plus
built-in air quality sensor to detect changes to
air quality in the surrounding area.
• The SensAir
light around the control panel
TM
will change colours according to the quality
of the surrounding air.
• The LED screen provides real-time indication
of fine particles PM2.5 concentration.
Microbe Shield
The Microbe Shield
the same button on the control panel. Pressing
the
cycle through these two settings.
Microbe Shield
• Press the
button until the
illuminates to turn it on.
• Press the button repeatedly until the light
extinguishes to turn off this function.
Night Mode
• To turn on Night mode, press the
Shield
• Press again until the light extinguishes to
turn off this function.
• After 10 blinks, all indicator lights on
the control panel will turn off as the unit
enters night mode and the fan speed will
automatically change to Low.
Purifier has a
TM
• Press any button on the control panel to
re-engage the control panel and turn off
night mode. The
The Night mode function does not save for
next use when the air purifier is switched off.
This function will need to be reset.
/NIGHT MODE
TM
and Night Modes utilise
TM
Microbe Shield
TM
/NIGHT button will
TM
Microbe Shield
Microbe Shield
/NIGHT button repeatedly until the
TM
icon starts to blink.
icon will extinguish.
NOTE
/NIGHT mode
TM
icon
TM
Microbe
9

Hide quick links:

Advertisement

loading