Functions - Breville the Smart AirPlus Connect Instruction Book

Table of Contents

Advertisement

Functions

OPERATING YOUR AIR PURIFIER
1. Press the
POWER button to turn on and
the control panel will illuminate.
2. The air quality sensor light will illuminate,
usually starting with a blue light until it has
time to sense the air quality and then it may
change to an alternate colour.
3. The air purifier will begin operation in the
last mode selected (excluding Night mode
and timer).
4. To adjust how the air purifier operates,
follow the directions below.
SensAir
LIVE PURITY CONTROL
TM
• Your Breville Smart Air Plus
Purifier has a built-in air quality sensor
to detect changes to air quality in the
surrounding area.
• The SensAir
indicator light around the
TM
control panel will change colours according
to the quality of the surrounding air.
• The LED screen provides real-time indication
of fine particles PM2.5 concentration.
Grade
Air Quality
1
Very Good
2
Good
3
Fair
4
Poor
* Air Quality Index.
Microbe Shield
/NIGHT MODE
TM
The Microbe Shield
TM
the same button on the control panel. Pressing
the
Microbe Shield
button will cycle through these two settings.
Connect
TM
AQI* Measured
Colour
in PM2.5
of Light
< 33
Blue
34–66
Yellow
67–99
Orange
> 100
Red
and Night Modes utilise
/NIGHT MODE
TM
Microbe Shield
TM
• Press the
Microbe Shield
MODE button until the
icon illuminates to turn it on.
• Press the button repeatedly until the light
extinguishes to turn off this function.
Night Mode
• To turn on Night mode, press the
Shield
/NIGHT MODE button repeatedly
TM
until the
icon starts to blink.
• Press again until the light extinguishes to
turn off this function.
• After 10 blinks, all indicator lights on
the control panel will turn off as the unit
enters night mode and the fan speed will
automatically change to Low.
• Press any button on the control panel to
re-engage the control panel and turn off
night mode. The
NOTE
The Night mode function does not save for
next use when the air purifier is switched off.
This function will need to be reset.
/NIGHT
TM
Microbe Shield
Microbe
icon will extinguish.
TM
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lap508

Table of Contents