Hardware Contents; Safety Information; Preparation - Project Source 58101-X5501 Manual

HARDWARE CONTENTS (not shown to actual size)
AA
Adhesive Pad
CC
Plastic Anchor

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate, or install the
product.
WARNING
• Follow the installation instructions carefully. Proper installation is the installer's responsibility.
• Failure to follow correct installation procedures can result in the faucet being loose, which can
result in serious injury.
CAUTION
• Check local building codes before you begin installation to ensure compliance.

PREPARATION

Before beginning the assembly of this product, make sure all parts are present. Compare parts with
the package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time: 120 minutes.
Tools Required for Assembly (not included): Thread Sealant Tape, Silicone Sealant, Pipe Wrench,
Phillips Screwdriver, Pliers.
Helpful Tools (not included): Safety Goggles.
X 1
X 2
BB
Rubber Sealing Washer
DD
Mounting Screw
4
X 1
X 2