Subscribe to Our Youtube Channel
Related Manuals for SUMERAIN S3223DI
Summary of Contents for SUMERAIN S3223DI
- Page 1 MODEL: S3223XI Version: V1.2 INSTALLATION GUIDE SHOWER SYSTEM MODEL FINISH S3223CI CHROME S3223NI BRUSHED NICKEL S3223DI MATTE BLACK S3223OI OIL RUBBED BRONZE S3223BGI BRUSHED GOLD HOT LINE: +1-866-203-0866...
- Page 2 THANK YOU Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
- Page 3 This warranty covers only your SUMERAIN manufactured product. SUMERAIN warrants this product against defects in material or workmanship as follows: SUMERAIN will repair at no charge for parts only or, at its option, replace any product or part of the product that proves defective because of improper workmanship and/or material, under normal installation, use, service and maintenance.
- Page 4 FUNCTIONS AND SPECIFICATION Shower System Faucet type Feature Concealed shower faucet Theme Modern, Contemporary Mounting type Wall mount Number of Handles Metal Handles Material Handle style Lever Shower Arm Reach 154mm [6-1/6 Inch] Showerhead Width 195mm [7-11/16 Inch] Showerhead Length 195mm [7-11/16 Inch] Φ...
- Page 5 DEMENSION FRONT VIEW OF SHOWER...
- Page 6 SIDE VIEW OF SHOWER...
- Page 7 Handheld shower ASSEMBLE PHS32230XX Screw cover PSA00002XX Shower hose ASSEMBLE FAE32300XX Diverter cartridge ASSEMBLE PCT00001XX Wall supply elbow HPB59-1 PHH32235XX Diverter sleeve HPB59-1 PSL32181XX If any of these items are missing, please contact SUMERAIN consumer service by email to: supports@sumerain.com.
- Page 8 4. PLANNING AND INSTALLATION INSTRUCTIONS Attentions: The shower has to be installed, rinsed and checked in compliance with the applicable regulations in order to guarantee proper shower function! The dimensions of the shower set-up must be individually. Operating pressure at the control valve: Max.
- Page 9 Secure the concealed box assembly to the mounting rack with screws and anchor. 6. VALVE TRIM INSTALLATION 6.1 Turn on your shut-off valve for cleaning the hot and cold water supply pipe before connect to the valve body, allow the water flush 3~5 minutes to flush out dirt and debris.
- Page 10 6.2 Apply Teflon tape on the thread of pipe inlet and then connect to valve inlet with elbow [hot left, cold right]. Mixer Valve Connecting thread for Hot &Cold water Mixer Valve inlet thread: NPT1/2 (US, CA) G1/2” [1/2 BSPP] (UK, Europe etc.) Connect to valve outlet with elbow:...
- Page 11 6.3 Remove the valve sleeve by Phillips screwdriver. Turn on hot and cold water supply and check all connection for leaks Please shut off your hot and cold water supply again if no leaking. 6.4 Drill the mounting holes exactly according to mixer valve and elbow position, done the finish wall. Cut the plaster shield around the finish wall surface and seal the wall around the plaster shield with waterproof sealant WARNING: Failure to seal the wall can lead to possible water damage.
- Page 12 6.5 Remove the valve sleeve by Phillips screwdriver and hold the screw for next step (fastening battery box).
- Page 13 6.6 Attach the escutcheon over the valve body. 6.7 Seal the wall around the plaster shield with waterproof sealant...
- Page 14 6.8 Attach handle onto the valve stem and tighten set screws by the Allen wrench that is provided. Please don’t over tighten. Done the same procedure on diverter knob. Finally press-in the screw cover. 6.9 Valve trim install finish.
- Page 15 7. SHOWERHEAD INSTALLATION 7.1 Attach Shower arm escutcheon to the shower arm and apply Teflon tape on the thread of shower arm, Secure the shower arm into the pipe elbow inside the wall by rotating clockwise. Standard thread of Shower arm inlet: NPT1/2 (US, CA) G1/2”...
- Page 16 7.2 Seal the wall around the shower arm escutcheon with waterproof sealant 7.3 Put the screen washer into the connector of showerhead and secure the showerhead on the shower head arm by hand rotating clockwise. Missing the screen washer might lead to shower invalid.
- Page 17 8. HAND SHOWER INSTALLATION 8.1 Apply Teflon tape on the thread of wall supply elbow and screw the thread into the pipe elbow inside the wall. 8.2 Attach the docking of hand shower holder to the wall and fasten by mounting screws.
- Page 18 8.3 Docking the hand shower holder to the dock and secure with set screw by Allen Key. 8.4. Connect the hand shower to the wall supply elbow with flexible hose.
- Page 19 9. INSPECTION 9.1 Turn on hot and cold water supply and check all connection for ensuring no leaking anywhere. 10. FUNCTION INSPECTION 10.1 Turn on the handle, the water outflow from the showerhead. 10.2 Switch the diverter Knob, the water will rush from the hand shower. INSTALL FINISH...
- Page 20 Please note: if the surface is already damaged, the effect of cleaning materials will cause further damage. Components with damaged surfaces must be replaced or injury could result. Damage caused by improper treatment is not covered under the warranty. HONGKONG SUMERAIN SANITARY INDUSTRY CO., LIMITED Address: ROOM 1018, HOLLYWOOD PLAZA 610 NATHAN ROAD MONGKOK, KL,HONGKONG Factory Address: Floor 3th,No.2 ZhongXing Road,ShuiNuan City Industrial Zone,Shuikou town, Kaiping City,...
Need help?
Do you have a question about the S3223DI and is the answer not in the manual?
Questions and answers