Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SUMERAIN S3073CL
Summary of Contents for SUMERAIN S3073CL
- Page 1 MODEL: S3073CL Version: 1.0 LED THERMAL SHOWER FAUCET SYSTEM...
- Page 2 Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. We welcome any questions or comments you may have and look forward to assisting you in the future.
-
Page 3: Specification
Specification Wall in, LED Thermal showerhead Function LED, Waterfall, Wall in Feature Contemporary Style Single Handle Number of Handles Adjustable Faucet Total Height 385mm [15 Inch] Showerhead Arm Spread 208mm [8.0 Inch] Showerhead Width Showerhead Length 208mm [8.0 Inch] Valve Type Ceramic Valve Faucet Body Material Brass... - Page 4 Dimension...
-
Page 6: Packing List
Packing list... - Page 7 ITEM NAME ITEM NAME Showerhead 1 PCS Showerhead arm 1 PCS Filter 1 PCS Escutcheon 1 PCS Rubber gasket 1 PCS 1 PCS Front panel 1 PCS Valve body 1 PCS Switch Knob 1 PCS Screw 1 PCS Handle 1 PCS Screw 1 PCS Hot/cold sign...
- Page 8 Step 1: Draw the dotted line of position where need to install shower system and Dig hole “A” , hole “B” , hole “C” and hole “D” according to below dimension...
- Page 9 Image 1: Front view Step 2: Put the valve body with front panel into digged hole of wall exactly, please fasten it to wall by screw if possible. Image 2: Front view of digging hole Image2: Through valve body with front panel into wall Image3: fasten to wall with screw...
- Page 10 Step 3: Screw the switch knob and handle to faucet body by internal hexagonal wrench “W” and “Z”, press the cold/hot sign into the handle hole as below. Image 4: Valve body installed...
- Page 11 Step 4: Through the showerhead arm with escutcheon into digged hole of wall and screw it with rubber gasket and nut. Screw-in the showerhead to showerhead arm, please don’t forget to put the filter into showerhead connecter at first.
- Page 12 Step 5: Through the water outlet port with escutcheon into hole of wall and screw it to wall by rubber gasket and nut. Step 6: Draw the dotted line of position where need to install sprayer holder and Dig hole “A” and hole “B” according to below dimension...
- Page 13 Beat the two plastic expansion nails into the hole “A” and hole “B” of wall Screw the holder fixture to plastic expansion nails in wall...
- Page 14 Push the sprayer holder to holder fixture, please make sure elastic pinch plate fasten to the bayonet closely...
- Page 15 Step 7: Connect the valve body with showerhead water inlet connecter and Sprayer water inlet connector (Water outlet port “O”) by flexible hose (Remark: the flexible hose need to order in local shop according to your required length)
- Page 16 Step 8: Please clear your hot and cold water supply system at first to avoid blocking. Connect the valve body to your hot water and cold water supply system...
- Page 17 Step 9: Connect the water outlet port “o” to sprayer “Y” with 1.2m sprayer hose “S” Step 10: Open your hot and cold water supply system and inspect is there anything leaking. Installation is finished if all the function working normally.
-
Page 18: Troubleshooting
Clean the faucets and showers as and when required. Regular ■ cleaning can prevent calcification. Never use cleaning materials contain hydrochloric, formic, ■ phosphoric or acetic acid, which may cause considerable damage. Never use cleaning materials or ap pliances with an abrasive effect, ■... - Page 19 Address: ROOM 1018, HOLLYWOOD PLAZA 610 NATHAN ROAD MONGKOK, KL Factory Address: Shuikou Industrial Park, Kaiping City, Guangdong Province, China (Mainland) Toll Free: 400-0999-075 E-mail:hk@sumerain.com SUMERAIN INTERNATIONAL GROUP – AMERICA Branch Address: 13455 Harper Dr. Saratoga, CA 95070 Tel: +1-408-867-8884 FAX: +1-408-867-4272...
Need help?
Do you have a question about the S3073CL and is the answer not in the manual?
Questions and answers