Advertisement
Table of Contents
THANK YOU
Thank you for purchasing the DWR/SR Series Fan Kit. Please read these instructions thoroughly
before installing and assembling this product.
PRODUCT FEATURES
• Extend equipment life by removing excess heat.
• Vent blockers provided to control airflow.
Instruction Sheet
DWR/SR Series
Fan Kit
100-00108
Rev A
Advertisement
Table of Contents
Related Manuals for LEGRAND Middle Atlantic DWR/SR Series
Summary of Contents for LEGRAND Middle Atlantic DWR/SR Series
- Page 1 Instruction Sheet DWR/SR Series Fan Kit THANK YOU Thank you for purchasing the DWR/SR Series Fan Kit. Please read these instructions thoroughly before installing and assembling this product. PRODUCT FEATURES • Extend equipment life by removing excess heat. • Vent blockers provided to control airflow. 100-00108 Rev A...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS - EN • Read these instructions. • Heed all warnings. • Clean only with dry cloth. • Keep these instructions. • Follow all instructions. • Only use attachments/accessories specified by the manufacturer. DANGER HAZARDOUS VOLTAGE: The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- Page 3 Guard Screw Guard Power Cord (2x) Side Front Vent Vent Blocker Blocker NOTE: • To order more hardware, contact support at av.support@legrand.com or (866) 977-3901. • Additional hardware is included that may not be required for your installation. Page 3...
-
Page 4: Required Tools
REQUIRED TOOLS • Rubber Mallet WARNING: Use tools with caution and follow all necessary safety • No. 2 Phillips Driver protocols. • 5/16” Wrench or Socket AVERTISSEMENT: Utiliser des outils avec prudence et suivre • Scissors tous les protocoles de sécurité nécessaires. NOTE: Scissors are required to trim vent blockers for all model enclosures, if necessary. -
Page 5: Grounding And Bonding
INSTALLATION (CONTINUED) 6” Fan Installation 6” Fan Installation • The 6” fans (DWRSR-6-FK and SR28-6-FK) use (4x) screws (D) and (4x) nuts (C) in total. (Meaning, (2x) screws and nuts for each fan). (FIGURE D) NOTE: DWR enclosures are pictured in these instructions, however, the installation is similar for both DWR and SR series products. -
Page 6: Warranty
Unit C, Island Rd. Eden Prairie, MN, 55344, USA DK, Weert, Netherlands Reading RG2, 0RP- UK At Legrand AV Inc. we are always listening. Your comments are welcome. Legrand AV is an ISO 9001 and ISO 14001 Registered Company. Page 6...
Need help?
Do you have a question about the Middle Atlantic DWR/SR Series and is the answer not in the manual?
Questions and answers