Pyle PKBRD6175P User Manual page 7

Repeatedly press the [Function] button until "19 Split Pt" appears on the LED screen.
In this case, the split point can be reset by pressing the [+/-] buttons or turning the
[data Dial] knob, or by the keystroke of the target key. Then the new split point is set
after the choosing ends.
SETUP OF MIDI CHANNELS
1. MIDI IN
Press the [Function] button repeatedly until "MIDI In" appears on the LCD screen.
In this case, the target channel can be chosen to play the input MIDI les by
pressing the [+/-] buttons or turning the [data Dial] knob to the "all", which means
all channels (coded 01 to 16 )are available. All channels are preset available when
the instrument is power on.
2. MIDI OUT
Press the [Function] button repeatedly until "MIDI Out" appears on the LCD screen.
In this case, the target channel can be chosen to transmit the output MIDI les by
pressing the [+/-] buttons or turning the [data Dial] knob. But some of the MIDI
les cannot be transmitted, such as the auto rhythm, demonstration songs, and
songs reserved in the instrument. When the instrument is power on, channel 01 is
preset available.
BANK SELECT
Press the [function] button repeatedly with "Bank Sel" appearing on the LCD screen.
In this case, the target voice bank, among 128 banks coded 01 to 128, can be chosen
to adjust the voice of the MIDI keyboard by pressing the [+/-] buttons or turning the
[data Dial] knob. When the instrument is power on, the preset voice bank is BANK01.
Note: There is just one voice bank, coded BANK 01, with 128 voices in the standard
GM voice bank. If there are other voice banks in the computer, they can be added
up to the instrument and de ned with codes from BANK 01 to 128.
V. Sounds and E ect
SELECTION OF SOUND
There are 162 kinds of Sounds in the system, including 128 GM sounds, 6 groups of
sounds for keyboard percussion, and 5 groups of sounds for folk music.
www.PyleUSA.com
7