Table of Contents
Advertisement
OCTAVE
The [Octave+/-] buttons can be applied to pitch the instrument an octave above or
below. Press either the [Octave+] or the [Octave-] for the rst time, the present
octave value shows on the LCD screen; press either of them again, the pitch of the
instrument can be an octave above or below within the rang of possibilities.
TRANSPOSE
Press the [Transpose ] or [Transpose ] button to transpose the tone of the notes.
The transpose may be adjusted from "-6" to "+6". Apply the both buttons at the same
time, the tone of notes turns normal to the preset value "0". In the transpose function
mode, the transpose value can also be altered by turning the [data Dial] knob.
DOUBLE KEYBOARD
Press the [Split] button with the cursor shining "SPLIT" to divide the keyboard into
two parts, the 24 keys on the left and the rest keys, to form a double keyboard.
The pitch of the left part becomes an octave above while that of the right part falls
an octave below, that is, the pitch of the two parts become consistent. Meanwhile, the
sound of the two parts can be di erent. The left part keeps the primary voice but the
right part can gain another one. Press the [Split] button again with the cursor darkening
"SPLIT", the function quits and the voice of the whole keyboard keeps that of the
previous right part.
Note: In the the auto-chord mode, the dynamic-feeling function, sustain e ect, the
pitch bend and the vibrato cannot work on the chord keyboard.
VI. Auto-Styles
SELECTION OF STYLES
There are 200 di erent styles to be chosen from, ranging from 00 to 200.
When the instrument is powered ON, the defaulted style is the one coded "00".
Press the [style] button with "STYLE" appearing on the LCD screen, then the target
style can be picked out through the number buttons, the [+/-] buttons or the [Data
Dial] knob.
10
www.PyleUSA.com
Advertisement
Table of Contents
