Pyle PKBRD6175P User Manual page 19

Note:
1. After a memory mode drawn out, all the parameters can be reset and become
di erent with those stored previously. In this state, the corresponding shining
cursor at the bottom of the screen disappears showing the mode has been
changed.
2. There is no power cut protection for all the memory modes, so when the instrument
regains power, the stored parameters are lost.
XII. Setup of the O.T.S (ONE TOUCH SET)
The O.T.S function has stored the often-used voices that suitable for the styles.
There are four defaulted sounds to match every piece of style.
1. Press the [O.T.S] button to start the "auto bass chord" with the shining "O.T.S"
and "M1" at the bottom of the screen.
2. After getting the target style ready, press the four memory buttons (M1 to M4),
then the style played on the keyboard will combine the four defaulted voices
perfectly.
3. In this function state, press the button again to exit the function.
Note: In the charge of the [O.T.S] button, the storage and memory function cannot
be started.
XIII. Record
PREPARATION FOR RECORD
Press the [REC] button with four beat spots twinkling and the "REC" shining on the
screen to show the system has got ready for recording. The pleasant sound, style,
tempo, sustain and other parameters can be set up before recording.
www.PyleUSA.com
19