Pyle PKBRD6175P User Manual page 20

RECORD
In this state, all notes that played on the keyboard are recorded with four beat spots
on the screen successively twinkling at the setup tempo.
In the "record" mode, a piece of accompaniment can be recorded directly after it is
started. In the "auto bass chord" state, any keystroke on the auto accompaniment
keyboard can start a piece of style.
But when the "auto bass chord" is out of charge, a piece of style can only be started
by pressing the [Start/Stop] button. During the recording of accompaniment, melody
notes can also be played on the keyboard and recorded together.
Note:
1. There is no power cut protection, so when the instrument regains power, the
recorded data are lost.
2. The new record will replace the primary one when this record function is applied
again.
3. The amount of the recorded notes is a ected by all the recorded data, including
di erent sounds, style, tempo, etc.
AFTER RECORD
1. In the "record" mode, press the [REC] button again to stop recording.
2. Dring the time that a style is proceeding and being recorded, press the
[Intro/Ending] button to start a piece of ending. When the ending ends, the
system will automatically stop recording and exit the "record" mode.
3. During recording, the completely taken-up memory will stop recording with
"FULL" shining for 3 seconds on the screen, then exit the "record" mode.
PLAYBACK
After the recording stops, press the [Playback] button to replay the recorded track.
20
www.PyleUSA.com