Table of Contents
Advertisement
2. Second, install and launch the music editing software, for example, CAKEWALK.
Then the special hardware of the instrument will appear in the hardware containing
the musical software, and shall be set as the default device. In this case, the data
communication between the instrument and the computer has been established.
3. Third, set the MIDI channels of the instrument
(Please check it out in the introduction of the [Menu] button).
SUSTAIN PEDAL NOT INCLUDED
The instrument can be added to an outer sustain pedal, which can be used to make
a sustain e ect on the performance.
III. Basic Method of Performance
Press the [Power] button with the back light on, and the LCD screen shows some
information of the current voice, tempo, function mode, etc.
The imaginary full screen that illustrates all mark cursors and parameters of
di erent modes:
The full screen of the LCD when power on:
MASTER VOLUME ADJUSTMENT
Turn the master volume knob clockwise to increase the master volume; counter-
clockwise to decrease. The knob also controls the volume of accompaniment.
www.PyleUSA.com
5
Advertisement
Table of Contents
