Table of Contents
Advertisement
%
Due to data protection, as well as the function
of individual driving systems and driving safety
systems, it is a requirement to carry out a
complete system reset before selling the vehi-
cle or transferring it to a third party, or after
use as a hire car.
AMG TRACK PACE
Function of AMG TRACK PACE
%
This function is an on-demand feature and
can be activated via Mercedes me after you
purchase your vehicle. The Digital Operator's
Manual contains further information on
Mercedes me and on-demand features.
With AMG TRACK PACE, the driving characteris-
tics on race tracks can be analyzed and opti-
mized. You can drive previously saved race tracks
(e.g. the Hockenheimring), or record and save
new tracks. The lap times set will be stored for
every track. These can be analyzed and compared
with other lap times to achieve the best possible
race results. Additionally, acceleration and brak-
ing operations can be measured and stored.
Note: Use AMG TRACK PACE only on closed cir-
cuits away from public roads. Adapt your driving
style to your personal skill level and environmental
conditions. As the driver, you are solely responsi-
ble for driving your vehicle. Park your vehicle
safely before operating the application.
Setting Track Race
Multimedia system:
TRACK PACE
Track Race
4
5
Recording a new track
Select Ü
New Track
.
#
Select Ì
Start Record.
at the desired
#
starting point.
The track recording starts at this point.
During track recording, sectors can be set to
divide up the track.
ö Select
Set
Sector.
#
Select É
Stop Recording
to end track
#
recording or cross the starting line again.
Confirm the prompt with Yes.
#
MBUX multimedia system 339
Select the weather.
#
%
The temperature is determined automatically.
Enter a name.
#
Press a to confirm.
#
The track is saved under the name entered.
Searching by track name
Select ª
Search
.
#
Enter the track name.
#
Tracks with the searched name are displayed.
Measuring time on a saved track
ß Select
All
tracks.
#
Select the desired track.
#
Select u.
#
Select
Start Time Recording
if you are already
#
at the starting line.
or
Select
Navigate to
for navigation to the start-
#
ing line.
Timing begins automatically when the starting line
has been crossed.
Advertisement
Table of Contents
