Autel Robotics Explorer EVO II Manual page 43

GPS mode
When the aircrafr detects an appropriate GNSS signal, it will activate the
GPS mode. With the assistance of the forward and downward vision
systems, GPS can locate and avoid obstacles, provide stable and smooth
flight control, and support safety functions such as return, fail-safe, etc.
When the C'iPS signal is weak and the light conditions cannot meet the
ATTI mode
vision system, the ATT[ mode is activated. The obstacle avoidance
function is disabled, and the altitude of the aircraft is controlled only
through its barometer.
In this mode, the aircraft works in the visual positioning mode, but the
environment and height are highly required. The environment must meet
Starpoint mode the lighting conditions, that is, it must be bright and the ground texture
must be clear, and regrading height, the aircraft works in a vision module
ca ability ran e, and the aircraft enters the ATTI mode over the height.
2.1.6 Intelligent flight features
•
Auto return
The return function is enabled only when there is good GPS signal. To enable the auto return
function manually, long press the return button (Go Home) (Q) on the remote controller for 3s.
Upon receipt of the instruction, the aircraft will automatically return and land on the preset return
point.
EVO II Enterprise can use its forward vision system ro detect and avoid [he obstacles on the flight
course. When [he aircraft is in the return state, the fimction of the remote controller are disabled,
you can activate it by pressing the Pause button (
).
0' Warning
If the forward vision system is not enabled during return, the aircraft cannot automatically avoid
obstacles, press the pause button (~) on the remote controller to exit the automatic return
function [o recover the control on the aircraft.
o Important
•
The return altitude is 30 m by default If you activate the return function when the aircraft is
below this altitude, the aircraft will rise to 30 m before performing return.
•
If the auto return function is activated within a radius of t0 m of the return point, the aircraft
will land automatically.
•
Fail-safe
The fail-safe function is to help 6V0 [I Enterprise UAVs to return automatically or (and at its
23