Table of Contents
Advertisement
Never secure objects with a seat belt if the
R
seat belt is also being used by one of the vehi-
cle's occupants.
Also ensure that no objects, e.g. a cushion,
are ever placed between a person and the
seat.
Fastening and adjusting seat belts
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can-
not be pulled out any further.
Occupant safety – Brief overview of the most important points
Always engage seat belt tongue
1
#
belt into seat belt buckle
2
of the corre-
sponding seat.
To adjust the seat belt height: press button
#
on the seat belt outlet and slide the seat belt
outlet to the desired position.
To engage the seat belt outlet: release button
#
3
and ensure that the seat belt outlet
engages.
* NOTE Deployment of components of the
restraint system when the front passenger
seat is unoccupied and a seat belt is
buckled
When the front passenger seat is unoccupied
and the seat belt tongue of the seat belt is
engaged in the seat belt buckle, components
of the restraint system may deploy unnecessa-
rily on the front passenger side, e.g. the Emer-
gency Tensioning Device.
Only buckle the seat belts as intended.
#
%
Observe the information on child seat safety
feature of the seat belt (
of the seat
Function of the restraint system warning lamp
When the vehicle is switched on, a self-test is per-
formed, during which the restraint system warning
3
lamp 6 lights up. It goes out no later than a
few seconds after the vehicle is started. The com-
ponents of the restraint system are then func-
tional.
41
page 63).
/
Advertisement
Table of Contents
