Table of Contents
Advertisement
Start the engine of the donor vehicle and
#
leave it running at idle speed.
Connect the negative terminal of the donor
#
battery to the jumper cable.
Connect ground point
3
of your vehicle to
#
the jumper cable.
Start the engine of your own vehicle.
#
Leave the engines running for several minutes.
#
Before disconnecting the jumper cables,
#
switch on an electrical consumer in your own
vehicle, e.g. the rear window defroster or the
lighting.
When starting assistance has finished:
Disconnect the jumper cable from ground
#
point
3
of your vehicle.
Disconnect the jumper cable from the nega-
#
tive terminal of the donor battery.
Disconnect the jumper cable from the POSI-
#
TIVE contact of your vehicle.
Disconnect the jumper cable from the positive
#
terminal of the donor battery.
Close protective cover
1
of POSITIVE con-
#
tact 2.
Further information can be obtained at a qualified
specialist workshop.
Charging the 12 V battery
Connect POSITIVE contact
2
of your vehicle
#
to the charging cable.
Breakdown assistance 321
Connect the positive terminal of the charger
#
to the charging cable.
Connect the negative terminal of the charger
#
to the charging cable.
Connect ground point
3
of your vehicle to
#
the charging cable.
Start the charging process.
#
When the charging process is complete:
Disconnect the charging cable from ground
#
point
3
of your vehicle.
Disconnect the charging cable from the nega-
#
tive terminal of the charger.
Disconnect the charging cable from the POSI-
#
TIVE contact of your vehicle.
Disconnect the charging cable from the posi-
#
tive terminal of the charger.
Close protective cover
1
of POSITIVE con-
#
tact 2.
Advertisement
Table of Contents
