Table of Contents
Advertisement
126 Light and visibility
Turn signals
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow
2
or 4.
The corresponding turn signal light will flash
three times.
To indicate permanently: push the combina-
#
tion switch beyond the point of resistance in
the direction of arrow
2
or 4.
Vehicles with Active Lane Change Assist:
A turn signal indicator activated by the
R
driver may continue to operate for the
duration of the lane change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
Activating/deactivating the hazard warning lights
Press button 1.
#
The hazard warning lights will switch on automati-
cally if:
the air bag has been deployed.
R
Cornering light
▌Cornering light function
The cornering light improves the illumination of
the road over a wide angle in the turning direc-
tion, enabling better visibility on tight bends, for
example. The cornering light will be activated only
when low beam is switched on.
The function will be active in the following cases:
At speeds below 25 mph (40 km/h) when the
R
turn signal light is switched on or the steering
wheel is turned
Advertisement
Table of Contents
