LifeSpan SDG Owner's Manual page 17

Go down anti-colli-
5Fd
sion sensitivity
6FS
Balance sensitivity
Press the "M" button to enter; it will display
"L5" (initial setting). Press "UP" or "DOWN"
to select your preferred level. Press the
"M" button again to confirm. After waiting
for 2 seconds, it will display the current
L0~L9
height, indicating the setting is complete.
( "L1" is the most sensitive setting, while
"L9" is the least sensitive setting. "L0"
turns off this function. "L5" corresponds to
approximately 15kg.)
Press "M" button to enter,It will display L5
(Initial). Press UP or Down to select your
favorite level, and Press the "M" button
to confirm. Wait for 2 seconds,then, it
will display current height, the setting is
L0~L9
completed.
("L1" is the most sensitive setting, "L9"
is the least sensitive setting. "L0" turns
off this function. "L5" corresponds to
approximately 3 degrees.)
15