LifeSpan SDG Owner's Manual page 16

Handset display
2br
brightness
3bE Setting voice
Go up anti-colli-
4Fu
sion sensitivity
Press "M" button to enter, it will display
. Press the "M" button again to confirm.
Wait for 2 seconds; it will display the
(initial)
current height. Once this is shown, the
brightness setting is complete.
After it display
,It will display
confirm. Wait for 2 seconds,It will display
current height, the low brightness setting
is completed
After it display
,It will display
confirm . Wait for 2 seconds, It will display
current height,the high brightness setting
is completed
Press "M" button to enter,It will display
, Press "M" button to confirm.
(Initial)
Wait for 2 seconds, , It will display current
height,the no voice setting is completed
After it display
DOWN ,It will display
button to confirm. Wait for 2 seconds, It
will display current height,the bee voice
setting is completed
Press "M" button to enter,It will display L5
(Initial) ,Press UP or Down to select the
your favorite level,Press "M" button to
confirm, Wait for 2 seconds, , It will display
L0~L9
current height,the setting is completed
("L1" is the most sensitivity setting, "L9" is
the least sensitivity setting."L0" is to turn
off this function, "L5" is about 15kg)
14
,press UP or DOWN
, Press "M" button to
,press UP or DOWN
,Press "M" button to
,press UP or
, Press "M"