How to enter the background of manual controller
Code
Function
1Un
Display units
Sub function
Setting method
Press the "M" button to enter the first
function programming setting; it will then
display
to confirm and wait for 2 seconds. It will
(Initial)
display the current height in centimeters.
Once this appears, the centimeters setting
is complete.
After it display
DOWN button; it will then display
Press the "M" button to confirm and wait
for 2 seconds. It will display the current
height in inches. Once this appears, the
inches setting is complete.
13
.Press the "M" button again
,press the UP or
.