Zline RBIV-30 Installation Manual
  1. Manuals
  2. Brands
  3. Zline Manuals
  4. Refrigerator
  5. RBIV-30
  6. Installation manual
Zline RBIV-30 Installation Manual

Zline RBIV-30 Installation Manual

Built-in refrigeration 30" and 36"
Hide thumbs Also See for RBIV-30:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation Manual
BUILT-IN REFRIGERATION
30" AND 36" RBIV MODELS
www.zlinekitchen.com

Advertisement

Table of Contents
loading

Related Manuals for Zline RBIV-30

Summary of Contents for Zline RBIV-30

  • Page 1 Installation Manual BUILT-IN REFRIGERATION 30" AND 36" RBIV MODELS www.zlinekitchen.com...
  • Page 2 ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your dreams is never out of reach. Through our unique designs and unparalleled quality, we’re dedicated to providing you an elevated experience in the heart of your home. With an endless selection of features and...
  • Page 3 ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury designs and professional features into everyone’s homes. Because we continually strive to improve our products, we may change specifications and designs without prior notice.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..... . . 1 BEFORE INSTALLATION ........9 Location Of The Electrical Wiring .

  • Page 5: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING THE PRODUCT • Always follow the applicable safety instructions. • The installer should leave these instructions with the consumer who should retain for local inspectors’ use and for future reference. •...
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS R600A REFRIGERANT WARNING This product contains R600a isobutane refrigerant, which is a very eco- friendly natural gas. However, it is also flammable. Please follow the warnings and installation instructions below: • If the product has been transported horizontally, you must wait a minimum of 4 hours after standing it upright before plugging it in.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS DISPOSING OF THE PACKAGING MATERIALS • The package has been designed to protect the product during transport and shipping. The packaging materials used are designed to not harm the environment and should be recycled after the appliance is installed. •...
  • Page 8 It must not be used out of Southern Hemisphere Between 61 °F (16 °C) and 100 °F (38 °C) this range. PRODUCT WEIGHT CATEGORY RBIV-30 RBIV-36 Product Weight 342 Ib (155 kg) 355 Ib (161 kg) LOAD BEARING CAPACITY OF THE DOORS...
  • Page 9 IMPORTANT SAFETY INSTRUCTIONS INSTALLATION ENCLOSURE You must follow the instructions below: • The floor on which the product will be installed must be capable of bearing a minimum of 1,200 pounds (544 kilograms). • The kitchen floor and bottom of the product must be at the same level. Otherwise, the air flow for the unit's cooling system may be impeded or reduced.
  • Page 10 IMPORTANT SAFETY INSTRUCTIONS Please observe the following rules: • The dedicated circuit breaker for this unit must be easily accessible in case of an emergency; it must not be hidden behind the product. • The electrical plug and cord must not touch the back surface of the product. Otherwise, it may get damaged due to the vibration of the product.
  • Page 11 The fuse is 15 amps, and the appliance must be connected to a dedicated electrical outlet. If combining two RBIV-30 units into an RBIV-60 model, ZLINE recommends both be plugged into independent circuits. They can be plugged into the same outlet, but the circuit must have a dedicated 15-amp breaker.
  • Page 12 IMPORTANT SAFETY INSTRUCTIONS VENTILATION Ventilation panels where the air enters and exits the unit must not be blocked or obstructed. In addition, you must periodically clean the dust and dirt that accumulates on the vent holes to ensure adequate ventilation. ELECTRICAL CONNECTION •...

  • Page 13: Before Installation

    BEFORE INSTALLATION TOOLS REQUIRED Tools to be used when installing the product are as follows (additional tools that may assist in installation are not listed here): TOOLS REQUIRED (NOT PROVIDED) • Cordless Drill • Safety Gloves • Safety Goggles • Tape Measure •...
  • Page 14 BEFORE INSTALLATION DUAL CABIN INSTALLATION METHODS (RBIV-60) Scan the QR code to view the most up-to-date version of our RBIV-60 Dual Built-In Refrigeration Installation Manual.
  • Page 15 BEFORE INSTALLATION PREPARATION FOR INSTALLATION AND CABINET CUTOUTS • ZLINE RBIV built-in refrigerators are panel-ready appliances designed to be a permanent kitchen fixture; therefore, precise cutouts and superior attention to detail are required for seamless integration, especially if custom panels are installed. The most common scenario is the unit is installed between two kitchen cabinets or decorative columns.

  • Page 16: Location Of The Electrical Wiring

    BEFORE INSTALLATION LOCATION OF THE ELECTRICAL WIRING • The location of the electrical outlet must be within the range provided below. • Using an outlet with a ground fault circuit interrupter (GFCI) is not recommended. Do not use extension cables or cords or 2-pin adapters, and do not remove the ground terminal of the grounding cable.

  • Page 17: Location Of The Water System

    BEFORE INSTALLATION LOCATION OF THE WATER SYSTEM • The water connected to the refrigeration unit must be potable. • The location of the water system must be within the range provided below. • The unit's water system must be connected to the main water system in the house. The user must be able to switch the water system on/off with a valve when necessary.
  • Page 18 BEFORE INSTALLATION • Check if the floor where the appliance will be installed is perfectly level. Use a level as shown below. WARNING • Check if the cabinet flanges are upright and straight using a level. • If the product is not level and plumb, problems may arise with installation and eventual operation of the unit.

  • Page 19: Product Dimensions

    BEFORE INSTALLATION PRODUCT DIMENSIONS RBIV-30...
  • Page 20 BEFORE INSTALLATION PRODUCT DIMENSIONS RBIV-36...
  • Page 21 BEFORE INSTALLATION PRODUCT DIMENSIONS RBIV-30 AND RBIV-36...
  • Page 22 BEFORE INSTALLATION PRODUCT DIMENSIONS RBIV-30...
  • Page 23 BEFORE INSTALLATION PRODUCT DIMENSIONS RBIV-30...
  • Page 24 BEFORE INSTALLATION PRODUCT DIMENSIONS RBIV-36...
  • Page 25 BEFORE INSTALLATION PRODUCT DIMENSIONS RBIV-36...
  • Page 26 BEFORE INSTALLATION PRODUCT AND CABINET DIMENSIONS...
  • Page 27 • 3/16" (5 mm) represents the gap between door panels. • These gap measurements are the same for custom panels and ZLINE-provided panels. • The refrigerator comes with a 4" (100 mm) stainless steel toe kick installed to fit a standard 84"...
  • Page 28 83 13/16" (2129 mm) Maximum 5 3/8" (137 mm) 34 1/8" (866 mm) 85 3/8" (2169 mm) CATEGORY RBIV-30 RBIV-36 D: Cabinet cutout width 30 3/16" (767 mm) 36 3/16" (919 mm) E: Width of refrigerator 29 3/4" (756 mm)
  • Page 29 BEFORE INSTALLATION UNPACKING • Use a box cutter to remove tape on the box packaging. • Cut the box packaging through the section illustrated in dotted lines in the figure below and remove it. • If this refrigerator was purchased with door panels, the panels and handles ship in multiple boxes and require additional assembly upon installation.
  • Page 30 BEFORE INSTALLATION REMOVE ALL THE POLYSTYRENE PACKAGING MATERIAL Do not remove the tape of the upper door(s) on the product until the refrigerator is fully placed into the cabinet cutout, or you run the risk of the ATTENTION unit tipping over.

  • Page 31: Parts Provided

    THE REFRIGERATOR TRIM PARTS ARE BOXED AND SECURED TO THE REAR OF THE REFRIGERATOR Check to ensure all parts are included, then set aside for later. PART NAME SPECIFICATION RBIV-30 RBIV-36 Refrigerator/freezer cabinet side trim 24 5/16", 49 9/16" (617 mm, 259 mm) Refrigerator door side trim 44 3/4"...
  • Page 32 Furniture door preparation template paper Cover furniture door bracket PART NAME SPECIFICATION IMAGE Screw door fixing bracket M4*12, truss washer head RBIV-30 RBIV-36 Screw door fixing bracket M4*12, truss w Door- door furniture connecting bracket T1. 0, Cr+ zn- coating Anti tip bracket T4.
  • Page 33 Part name spec Furniture door preparation template paper Furniture door preparation template paper PART NAME SPECIFICATION IMAGE RBIV-30 RBIV-36 Anti tip bracket T4. 0, Zn- coating Anti tip bracket T4. 0, Zn- coating Cabinet mounting bracket Dowel Dowel Screws to secure cabinet mounting brackets...

  • Page 34: Installation

    INSTALLATION REMOVING THE LOWER FREEZER DRAWER • NOTE: We recommend removing the lower freezer drawer and door for easier kickplate and feet access when installing the appliance. • To remove the lower freezer drawer, unscrew the four thumb screws by hand as shown below and put them in a safe place.

  • Page 35: Removing The Freezer Door

    INSTALLATION REMOVING THE FREEZER DOOR • Locate and remove the two Phillips-head screws near the front section of the support rails that connect to the freezer door. • While supporting the freezer door, carefully pull the door forward while freeing it from the rear rail lock tabs and lift up and away to remove it.
  • Page 36 INSTALLATION REMOVING THE LOWER VENT PANEL Remove the two Phillips-head screws to take out the lower vent panel assembly; set the screws aside. REMOVING THE UPPER VENT PANEL Remove the two screws to take out the upper vent panel; set the screws aside.
  • Page 37 INSTALLATION PRE-INSTALLATION NOTES Continue to install the product according to the instructions below. Additionally, consider national and local government codes and instructions regarding installation requirements and clearances. Please observe the following: • For the USA, National Electrical Code, ANSI/NFPA 70-latest version; state or municipality directives;...
  • Page 38 INSTALLATION • Mark the upper rear of the wall in your cabinet cutout to locate the anti-tip brackets (page 28, Item No. 2). CATEGORY RBIV-30 RBIV-36 29 3/4" (756 mm) 35 3/4" (908 mm) 23 5/8" (600 mm) 23 5/8" (600 mm) 3 3/16"...
  • Page 39 INSTALLATION • Use the hammer to tap anti-tip anchors (page 28, Item No. 3) into the wall. • Fit the anti-tip brackets into their places, using four screws (page 28, Item No. 4) for each. You must use both brackets to ensure safety of the product. •...
  • Page 40 INSTALLATION ALTERNATIVE ANTI-TIP METHOD ANTI-TIP BRACKETS • If the anti-tip brackets cannot be connected securely, you must use the alternative method outlined below. • In this method, you can use wooden blocks (not provided) to avoid the risk of the unit tipping over.
  • Page 41 INSTALLATION PREPARING THE WATER HOSE AND POWER PLUG • You will need a hose with a minimum length of 60" (1524 mm) and a diameter of 1/4" (6 mm) for water connections during installation. • A connector that has a thread with an external diameter of 1/4" (6 mm) must be used to connect the hose end to the product.
  • Page 42 INSTALLATION MOVING THE UNIT FROM THE WOODEN PALLET • With a Phillips-head screwdriver or drill bit, remove the screws from the security brackets that connect the refrigerator to the wooden pallet as outlined below. • With at least two people, recline the refrigerator with the help of a dolly/hand truck to lift it off the pallet and Styrofoam packaging, then slowly lower the refrigerator to the floor.
  • Page 43 INSTALLATION ATTACHING THE CABINET MOUNTING BRACKETS Affix the eight cabinet mounting brackets (page 29, Item No. 12) to both sides and the top of the appliance — two on the top and three on each side, as outlined below. Using a screwdriver or drill with a Phillips-head bit, secure 16 screws to the cabinet mounting brackets (page 28, Item No.

  • Page 44: Preparing For Placing The Refrigerator Into The Cabinet

    INSTALLATION PREPARING FOR PLACING THE REFRIGERATOR INTO THE CABINET • Before preparing to push the unit into the cabinet cutout, run the water line hose through the rear channel of the refrigerator (below image, right circle) to the front of the unit (below, left).
  • Page 45 INSTALLATION PLACING THE REFRIGERATOR INTO THE CABINET • Apply the below method — tie a nylon string or other durable string/cable around the power cord — to prevent the power cord from getting jammed. Make sure the power cable is not jammed when placing the product, or else you increase the risk of electric shock or power failure.
  • Page 46 INFO NOTE: The image below is of an RBIV-30 with panels installed in order to show proper gaps when aligning refrigerator and freezer doors. The gaps are the same for RBIV-36 models: •...
  • Page 47 INFO If this refrigerator was purchased with ZLINE-provided door panels, the position of the refrigerator needs to be adjusted so that the door and the cabinet surface are flush, as shown in the figure below.
  • Page 48 INSTALLATION USING THE POSITION ALIGNMENT GAUGE • If this refrigerator was purchased without ZLINE-provided door panels, the product can be placed using the position alignment gauge (Item No. 5) as outlined below in order to align with custom panels, which vary in size and thickness.
  • Page 49 INSTALLATION ADJUSTING THE REFRIGERATOR HEIGHT • With the unit now aligned, push it carefully into the cabinet cutout. • Next, the feet need to be raised in order to secure the product to the anti-tip brackets. • You may use a drill with a 1/4" hex bit or a socket wrench to adjust leg height; we recommend using a socket wrench by hand to avoid the risk of stripping the legs.
  • Page 50 INSTALLATION Confidential SECURING THE UNIT TO THE CABINET CUTOUT IMP OR T ANT INF OR MAT ION: If you have difficulty tightening the s crews , opening a reference hole with the drill will m ake this procedure eas ier. •...
  • Page 51 WAR NING: P res s ure of t he wat er s ys tem m us t be between 25-80 ps i (1.7-5.5 B ar). INSTALLATION IMP OR T ANT INF OR MAT ION: Once t he connection is com plet e, you m us t turn on t he m ains valve and m ake s ure INSTALLING THE WATER CONNECTION t hat there is no leakage at that point.
  • Page 52 DUAL UNIT INSTALLATION • If combining two RBIV-30 units into an RBIV-60 model, please note both RBIV-30 units have a dedicated water supply, each requiring a hose with a minimum length of 60"...
  • Page 53 INSTALLATION Us e 2 s crews t o att ach t he upper vent hole part. RE-ATTACHING THE VENT PANELS • Use the two screws removed previously on page 32 to re-attach the upper vent panel. Confident ial Us e 2 s crews to attach the lower vent hole part. •...
  • Page 54 INSTALLATION ATTACHING THE TRIM PIECES • Attach the cabinet side trim pieces (page 27, Item No. 1) onto the refrigerator and freezer, covering the cabinet mounting brackets as shown below. • Attach the refrigerator cabinet top trim (page 27, Item No. 4) onto the refrigerator, covering the cabinet mounting brackets as shown below.

  • Page 55: Door Panel Preparation

    INSTALLATION DOOR PANEL PREPARATION The following pages contain information about preparing the door panels and mounting them to the product. ATTACHING THE DOOR HANDLES For both the refrigerator and freezer door handles, the provided mounting studs need to be installed on the decorative side of the panel; fix the other side of the screw in place with a washer and nut, and attach the handles as shown below.
  • Page 56 90°. You must use a limiting pin on the hinge. • To limit the opening degree of your RBIV-30 door to 90°, insert one 90° limiting pin (page 28, Item No. 6) into the hole on the bottom hinge outlined in the images above.
  • Page 57 on contains inform at ion about preparing t he furnit ure doors and m ounting them t o the product. INSTALLATION R em ove s crews to t ake out the cover door hanger bracket upper and fixing bracket. fident ial REMOVING THE DOOR BRACKET COVERS WARNING T his s ect ion cont ains inform at ion about preparing the furniture doors and m ounting them t o t he product .
  • Page 58 ent ial INSTALLATION REMOVING THE DOOR PANEL-ADJUSTMENT BRACKETS R em ove t he upper and lower Adjus t ing Mec hanis m as s em blies from t he door. • Using a drill or socket wrench, remove the bolts securing the upper and lower door panel hanger brackets from the refrigerator door.
  • Page 59 INSTALLATION Confident ial PREPARING DOOR PANELS You must take the dimensions on the following pages into account when positioning the door panel hanger brackets on the panel. When pre-drilling IMP OR T ANT INF OR MAT ION: INFO holes, you can use the provided door panel preparation template (page Y ou m us t t ak e t he dim ens ions int o ac c ount when grouping t he c radle part s on t he furnit ure door.
  • Page 60 INSTALLATION PREPARING THE REFRIGERATOR DOOR PANEL RBIV-30 REFRIGERATOR DOOR PANEL DIMENSIONS 1 7/16" (38 mm) 1 1/8" (28 mm) 26 13/16" (680 mm) 29 3/4" (756 mm) 1 7/16" (38 mm)
  • Page 61 INSTALLATION PREPARING THE REFRIGERATOR DOOR PANEL RBIV-36 REFRIGERATOR DOOR PANEL DIMENSIONS 15 3/4" (400 mm) 1 1/8" (28 mm) 17 1 1/16" (449 mm) 17 1 1/16" (449 mm) Right door Left door 15 3/4" (400 mm) 13/16" (21 mm) 1 1/8"...
  • Page 62 You must use screws suitable for the door thickness; this can vary depending on if you opt for custom panels. WARNING RBIV-30 — 20 screws total, 10 for each bracket RBIV-36 — 24 screws total, 6 for each bracket (2 brackets per door)
  • Page 63 INSTALLATION PREPARING THE FREEZER DOOR PANEL RBIV-30 AND RBIV-36 FREEZER DOOR PANEL DIMENSIONS 2 9/16" (65 mm) RBIV-30: 29 3/4" (756 mm) RBIV-36: 35 3/4" (908 mm)
  • Page 64 You must use screws suitable for the door thickness; this can vary depending on if you opt for custom panels. WARNING RBIV-30 AND RBIV-36 freezer door - 18 screws total, 6 for each bracket ATTACHING THE DOOR HANDLES For both the refrigerator and freezer door handles, the provided mounting studs need to be installed on the decorative side of the panel;...
  • Page 65 INSTALLATION INSTALLING THE REFRIGERATOR DOOR PANEL • With brackets properly installed, hang the door panel to the refrigerator door by aligning the top door panel hanger bracket to where the upper bracket and trim covers were removed on pages 53–54.
  • Page 66 INSTALLATION ALIGNING THE REFRIGERATOR DOOR WITH BOLTS • You must position the door panel to be flush with both the refrigerator door and to the cabinet cutout. • Distances between the doors must be 3/16" (5 mm); refer to page 42 as a reminder on how to properly align the door panels.
  • Page 67 INSTALLATION ALIGNING THE REFRIGERATOR DOOR WITH BOLTS • Perform a similar process with the fixing bolts located at the bottom door panel hanger bracket, as shown below. Front & back Up & down Fixing furniture Left & right door completely...
  • Page 68 INSTALLATION SECURING THE REFRIGERATOR DOOR PANEL • Once the refrigerator door is aligned at top and bottom, use the door panel connecting bracket (page 29, Item No. 16) to connect to the door. • Use one door fixing screw (page 29, Item No. 15) to attach each bracket onto the door. •...
  • Page 69 INSTALLATION SECURING THE REFRIGERATOR DOOR PANEL • Clip the door panel connecting bracket cover (page 29, Item No. 14) onto each bracket as shown below.
  • Page 70 SECURING THE REFRIGERATOR DOOR PANEL • Re-attach and screw in the upper/lower cover mounting brackets that were removed on page 53. NOTE: The below image is for the RBIV-30. There is a magnet in the cover of the top refrigerator door mounting bracket. This is a functional part for the operation of the product.
  • Page 71 INSTALLATION SECURING THE REFRIGERATOR DOOR PANEL • Re-attach and screw in the upper/lower cover mounting brackets that were removed on page 53. NOTE: The below image is for the RBIV-36. There is a magnet in the cover of the top refrigerator door mounting bracket. This is a functional part for the operation of the product.
  • Page 72 INSTALLATION SECURING THE FREEZER DOOR PANEL • Attach door panel connecting brackets (page 29, Item No. 16) on the lower part of the freezer, each with one screw (page 29, Item No. 15) • Attach the panel onto the freezer door using the previously installed freezer door panel hanger brackets (page 60).
  • Page 73 INSTALLATION SECURING THE FREEZER DOOR PANEL • Align the upper part of the door with the freezer door and secure the freezer door panel hanger brackets with three screws (page 28, Item No. 8) as outlined below. • Freezer door adjustment spacers (page 28, Item No. 7) are provided if needed to align the freezer door up and down.

  • Page 74: Reinstalling The Freezer Door

    INSTALLATION REINSTALLING THE FREEZER DOOR • Clip the door panel connecting bracket cover (page 29, Item No. 14) onto each bracket. You must keep these parts for future use. You will need them if you want to change the door directions. WARNING •...
  • Page 75 INSTALLATION REINSTALLING THE FREEZER DOOR • Fasten the freezer door panel onto the rails with two screws removed on page 31. • Replace the drawer in the reverse of page 30.
  • Page 76 INSTALLATION REINSTALLING THE FREEZER DOOR • Re-fasten the four thumb screws by hand that were removed on page 30. • Lastly, attach the freezer door top cover (Item No. 5, page 27) using the tabs.
  • Page 77 INSTALLATION INSTALLATION ATTACHING THE TRIM PIECES • Attach the refrigerator and freezer side trim seals (page 27, Item Nos. 2 and 3). • The backing paper of the double-sided tape should be removed before attaching the trim pieces.

  • Page 78: Hinge Adjustment

    INSTALLATION HINGE ADJUSTMENT To adjust the tension of the door hinges, use a drill to adjust the hardness of the upper and lower hinges of the refrigerator door. Set the hinge adjustment screw to position "I" from position "O". • •...

  • Page 79: Changing The Direction Of The Refrigerator Door

    INSTALLATION CHANGING THE DIRECTION OF THE REFRIGERATOR DOOR (30" MODELS) • To remove the refrigerator door assembly, use a 1/4" / T25 Torx bit to adjust the tension level to “0”.
  • Page 80 INSTALLATION CHANGING THE DIRECTION OF THE REFRIGERATOR DOOR (30" MODELS) • Next, remove the side trim pieces as outlined below. Failure to set the hinge to "0" and continuing the installation like that may cause injury. WARNING...
  • Page 81 INSTALLATION Magnet CHANGING THE DIRECTION OF THE REFRIGERATOR DOOR (30" MODELS) • Remove two Phillips-head screws to take out the upper bracket trim cover and cover mounting bracket. Magnet • Remove two Phillips-head crews to take out the lower cover mounting bracket. There is a magnet in the cover of the top refrigerator door mounting bracket.
  • Page 82 INSTALLATION CHANGING THE DIRECTION OF THE REFRIGERATOR DOOR (30" MODELS) • Remove the lower and upper connecting brackets and fixing screws.
  • Page 83 INSTALLATION REMOVING AND PREPARING THE INNER REFRIGERATOR DOOR • Remove the four hinge connection screws of the hinge brackets as shown below. The refrigerator door assembly will be free once these screws are removed. It will be heavy; be sure to take measures to prevent the door from falling or causing WARNING any damage or injury.
  • Page 84 Important installation instructions for INSTALLATION reversing the direction of the refrigerator door REVERSING THE DIRECTION OF THE REFRIGERATOR DOOR NOTE: It's important to note that the two metal connection brackets are not identical. When reversing the hinge from right to left, the connection brackets must be installed on the opposite NOTE: It's important to note that the two metal connection brackets are not identical.
  • Page 85 INSTALLATION REPLACING THE HINGES • Remove the hinge caps located at the other side where you will fix the hinges as outlined below.
  • Page 86 INSTALLATION REPLACING THE HINGES • Remove the lower right hinge by- loosening its two screws and fix it to its slot at the upper left side as outlined below.
  • Page 87 INSTALLATION REPLACING THE HINGES • Remove the upper right hinge by loosening its two screws and fix it to its slot at the lower left side as outlined below.
  • Page 88 INSTALLATION REPLACING THE HINGES • Attach the hinge slot caps removed from the left side to the hinge caps at the right side as outlined below.
  • Page 89 INSTALLATION RE-INSTALLING THE REFRIGERATOR DOOR • Place the refrigerator inner door to the unit and affix it with four screws removed on page 79 to achieve the new door swing layout as outlined below.
  • Page 90 RBIV-60 DUAL CABIN INSTALLATION • IMPORTANT: If you've purchased an RBIV-60 dual refrigerator, the installation process requires combining two RBIV-30 models to create one RBIV-60 unit. • The RBIV-60 dual refrigerator is a panel-ready appliance designed to be a permanent fixture in your custom kitchen;...

  • Page 91: Warranty

    ZLINE warranty periods begin from the original purchase date of the product and solely cover the original purchaser of the product, delivered new and in its original carton. The limited warranty covers all parts and labor for necessary repairs if any part of the product, or the product itself, proves to be defective in materials or workmanship.
  • Page 92 ZLINE reserves the right to offer to replace the defective part or the product or provide the original purchaser a full refund of the purchase price of the product (not including installation, removal, or other charges that were not included in the original purchase price).
  • Page 93 Scan the QR code to view the most up-to-date version of our user manual and installation manual. Scan the QR code for the Dual Built-In Refrigerator manual. Need to purchase a part or accessory for your ZLINE product? Visit www.zlineparts.com, ZLINE's official parts distribution partner.
  • Page 94 Always check the ZLINE website for the most up-to-date version of its product manuals: www.zlinekitchen.com/pages/manuals. Do not install or operate any ZLINE product if it has missing or broken parts or if it arrives damaged due to shipping. If ZLINE products arrive damaged, contact ZLINE Customer Experience at 1-614-777-5004 for help.
  • Page 95 3.3.2 1-614-777-5004 www.zlinekitchen.com contact@zlinekitchen.com...

This manual is also suitable for:

Rbiv-36

Table of Contents