Zline RBIV-30 Installation Manual
  1. Manuals
  2. Brands
  3. Zline Manuals
  4. Refrigerator
  5. RBIV-30
  6. Installation manual
Zline RBIV-30 Installation Manual

Zline RBIV-30 Installation Manual

Hide thumbs Also See for RBIV-30:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation Manual
BUILT-IN REFRIGERATORS
www.zlinekitchen.com

Advertisement

Table of Contents
loading

Related Manuals for Zline RBIV-30

Summary of Contents for Zline RBIV-30

  • Page 1 Installation Manual BUILT-IN REFRIGERATORS www.zlinekitchen.com...
  • Page 2 With an endless selection of features and finishes, our inspiration is your reality. ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury designs and professional features into everyone’s homes. Because we continually strive to improve our products, we may change specifications and designs without prior notice.

  • Page 3: Warranty

    TABLE OF CONTENTS COVERAGE SAFETY INSTRUCTIONS ZLINE Kitchen and Bath refrigerators have a one year parts and service warranty and a five year parts warranty on the sealed system. This is from the original purchase date for the PRE-INSTALLATION PROCEDURES original purchaser of the product.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS R600A REFRIGERANT PLEASE READ THIS MANUAL BEFORE USING THE PRODUCT • Always follow the applicable safety instructions. WARNING This product contains R600a isobutane refrigerant, which is a very eco- • Keep the user manual in an easily accessible place for further use. friendly natural gas.

  • Page 5: Before Installation

    The User Manual provided with the product must also be taken into WARNING consideration. CATEGORY RBIV-30 RBIV-36 You may get seriously injured and your product may get damaged if you ignore the warnings given in this manual. Please read the following...

  • Page 6: Installation Enclosure

    • The dedicated breaker must be easily accessible in case of an emergency; it must not be hidden behind the product. • Plug or cable must not touch the back surface of the product. Otherwise, it may RBIV-30 RBIV-36 get damaged due to the vibration of the product.
  • Page 7 BEFORE INSTALLATION BEFORE INSTALLATION VENTILATION Failure to follow these instructions may result in death, fire or electric shock. Connecting the grounding conductor of the equipment to an Vent panels where the air enters and exits the unit must not be blocked or obstructed. improper place may lead to electric shock.

  • Page 8: Tool List

    INSTALLATION INSTALLATION TOOL LIST • Dual cabin installation methods Tools to be used when installing the product are as follows: TOOLS REQUIRED (NOT PROVIDED) • Cordless Drill • Safety Gloves • Safety Goggles • Tape measure • 1/2" Wrench • 1/4" Torx •...

  • Page 9: Preparation For Installation

    INSTALLATION INSTALLATION PREPARATION FOR INSTALLATION LOCATION OF THE ELECTRICAL WIRING The instructions below have been prepared for a built-in type of refrigerator defined Location of the electrical wiring must be within the range given below. as: the appliance and panels are flush with the front and side of the cabinetry. Do not use extension cables or two-pin adaptors and do not remove the The most common installation scenario is refrigerator is mounted in their own box ground terminal of the grounding cable.

  • Page 10: Location Of The Water System

    INSTALLATION INSTALLATION LOCATION OF THE WATER SYSTEM • Check if the floor where the product will be installed is level. Use a level. The water connected to the water mains must be potable. WARNING • Check if the cabinet flanges are upright and straight using a level. Location of the water system must be within the range given below.

  • Page 11: Product Dimension

    INSTALLATION INSTALLATION PRODUCT DIMENSION RBIV 36 RBIV-30...
  • Page 12 INSTALLATION INSTALLATION RBIV-30 CATEGORY RBIV 30 RBIV 36 15 1/4" (388mm) 15 1/4" (388mm)
  • Page 13 INSTALLATION INSTALLATION RBIV-30 RBIV-36...
  • Page 14 INSTALLATION INSTALLATION RBIV-36...
  • Page 15 4” (102mm) 32 1 1/16” (831mm) 84” (2134mm) 83 13/16“ Minimum 3 13/16” (97mm) 32 1/2“ (826mm) (2129mm) Maximum 5 3/8“ (137mm) 34 1/8“ (866mm) 85 3/8“ (2169mm) RBIV-30 RBIV-36 CATEGORY RBIV 30 RBIV 36 30” (762mm) 29 3/4” (756mm)
  • Page 16 INSTALLATION INSTALLATION UNPACKING REMOVE ALL THE POLYSTYRENE PACKAGING MATERIAL At least two persons must carry the refrigerator. WARNING • Use a box cutter to remove the tapes. • Cut the Packaging Board with a Box Cutter through the section illustrated in dotted lines and remove it. Do not remove the tape of the upper door on the product until the refrigerator is placed into the cabin.
  • Page 17 INSTALLATION INSTALLATION THE REFRIGERATOR TRIMS ARE BOXED AND SECURED TO THE REAR OF THE REMOVE MOUNTING PARTS FROM THE FREEZER COMPARTMENT. REFRIGERATOR. PART NAME SPEC RBIV 30 RBIV 36 Template door panel paper Anti-tip bracket T4.0, Zn-coating Anchor PART NAME SPEC RBIV 30 RBIV 36 Screw anti tip bracket screws...
  • Page 18 INSTALLATION INSTALLATION REMOVING MOUNTING PARTS IN THE FREEZER COMPARTMENT We recommend removing the freezer crisper and door for easier kickplate and feet access. REMOVING THE FREEZER CRISPER • To remove the freezer crisper, unscrew the four knurled screws as shown and put them in a safe place.

  • Page 19: Removing The Freezer Door

    INSTALLATION INSTALLATION REMOVING THE FREEZER DOOR HOW TO REMOVE THE LOWER VENT PANEL • Locate and remove the two screws near the front section of the support rails that • Remove the 2 screws to take out the Lower Vent Panel Assembly. connect to the freezer door.

  • Page 20: Pre-Installation

    INSTALLATION INSTALLATION PRE INSTALLATION • Mark the wall for Anti-Tip Brackets (7). Continue to install the product according to the instructions below. Additionally, consider national and local instructions regarding installation. Please observe the following: • For the USA, The National Electrical Code, ANSI/NFPA 70 – last version/State or Municipality directives and/or regional directives.
  • Page 21 INSTALLATION INSTALLATION • Use the hammer to fit the anchors (8). Alternative anti-tip method: If the anti-tip brackets cannot be connected securely, you must use the alternative method below. In this method, you can use wooden blocks to avoid the risk of tipping over.

  • Page 22: Cabinet Installation

    INSTALLATION INSTALLATION Preparing the Water Hose and the Power Plug CABINET INSTALLATION You will need a hose with a minimum length of 60" (1.5 meters) and a diameter of ¼" Taking the Refrigerator from the Wooden Pallet for water connections of the product during installation. •...

  • Page 23: Installation

    INSTALLATION INSTALLATION Placing the refrigerator into the cabinet Screwing the side brackets • Route waterline through the channel of refrigerator to the front of the unit. • Fix the brackets (Item No17) to the unit, where 2 on the top, and 3 on every side. Use the screws (Item No18) to tighten.
  • Page 24 INSTALLATION INSTALLATION If you have difficulty tightening the screws, opening a reference hole You can use tape and similar protectors on parts you think are with the drill will make this procedure easier. necessary to protect the edges of the cabinets when placing the INFO INFO product.
  • Page 25 INSTALLATION INSTALLATION After carefully pushing the product into the cabinet, the feet need to be raised in order Adjusting the refrigerator according to the cabin flange to secure the product to the anti-tip brackets. INFO • For products with clad doors, the position of the refrigerator is adjusted so that the door and the cabinet surface are flush.
  • Page 26 INSTALLATION INSTALLATION It is very important to align the upper edge of the Freezer door when aligning. Once the water line connection is complete, you must turn on the main All the other edges can be adjusted with the adjustment mechanisms. water valve and make sure that there is no leakage at that point.

  • Page 27: Door Panel Preparation

    INSTALLATION INSTALLATION Forward-backward travel distance of the lower kick plate must be If the door thickness is more than 1 ½” (38 mm), the door should not open 5/16" (23 mm). As you can see in the figure, the decorative kick plate must not more than 90°.
  • Page 28 INSTALLATION INSTALLATION Removing the Mechanism Covers Removing the Panel Adjustment Mechanisms on the Refrigerator • Remove one screw to take out the FF Upper Cover. • Remove the upper and lower adjusting mechanism assemblies from WARNING WARNING the refrigerator door(s). Note: There is a magnet in the cover of the top refrigerator door hanger bracket.
  • Page 29 INSTALLATION INSTALLATION PREPARING DOOR PANELS PREPARING THE FRIDGE DOOR PANEL You must take the dimensions into account when grouping the door CATEGORY RBIV 30 panel brackets on the door panels. When marking, you can use the INFO "Door panel preparation template" (Item No 6) provided with the 29 3/4“...
  • Page 30 INSTALLATION INSTALLATION RBIV-36 You must use screws suitable for the door thickness. WARNING • Install 2 door panel brackets using the chipboard screws (Item No23). You can also use the template (Item No 6) provided with the product to align these parts. It is recommended to keep this template for future reference.
  • Page 31 INSTALLATION INSTALLATION PREPARING THE FREEZER DOOR PANEL PREPARING THE FREEZER DOOR PANEL RBIV 30 RBIV 36 Handle connection holes must be adjusted according to the handles to be used in kitchen design. WARNING Minimum thickness of the door must be ¾" (19 mm). WARNING...
  • Page 32 INSTALLATION INSTALLATION • You must use screws suitable for the door thickness. • Lay down the door panel, and place the freezer door onto it • Put the screws back but do not tighten WARNING WARNING • Install 1 cradle using the chipboard screws (Item No23). You can also use the template (Item No 6) provided with the product to align these parts.
  • Page 33 INSTALLATION INSTALLATION You will find more crescent washers than you need in the mounting box. • Adjust from lower part of the door with 2 screws removed from here You can use them if your kitchen design requires so. together with 2 slotted screws. WARNING WARNING •...
  • Page 34 INSTALLATION INSTALLATION • Adjust from lower part of the door with 2 screws removed from here • Clip the decoration cover (Item No19) together with 2 slotted screws. WARNING WARNING • Use the bracket (Item No2) to join the door panel and fridge door, use 2 screws (Item No20) and 1 screw (Item No22) to fix.
  • Page 35 INSTALLATION INSTALLATION • Use the 4 screws removed from here to fix the upper/lower INSTALLING THE FREEZER DOOR PANEL decoration cover. WARNING WARNING • Note: The upper decoration cover must contain the magnet for the • Install the freezer door panel assembly onto the rails, noting the magnetic door switch.
  • Page 36 INSTALLATION INSTALLATION • Locate the drawer onto the rail and tighten the four knurled screws If you need to adjust the door panels and the operating principle of the mechanisms removed earlier. are shown below. WARNING WARNING Panel-adjustment for fridge door Use the double-threaded bolts to align the door panel 2.
  • Page 37 INSTALLATION INSTALLATION • Attach the side closing seals (2) (3). WARNING WARNING Panel-adjustment for freezer door Use the freezer door panel adjustment washer to align the door panel top part. 2. Engage set screw1 (see the graphic) to shift the panel side to side. 3.

  • Page 38: Hinge Adjustment

    INSTALLATION INSTALLATION HINGE ADJUSTMENT CHANGING THE DIRECTION OF THE REFRIGERATOR DOOR WARNING WARNING How to adjust the tension of the door hinges How to remove the refrigerator door assembly • Use a drill to adjust the hardness of the upper and lower hinges of •...
  • Page 39 INSTALLATION INSTALLATION Failure to set the hinge to "0" and continuing the installation like that • Loosen 2 screws of the lower cover of the fridge door and remove may cause injury. ATTENTION ATTENTION • Remove the side closing seals. •...
  • Page 40 INSTALLATION INSTALLATION The refrigerator door assembly will be free once these screws are • Take out the door and lay it down on a table remove the fixing removed. It will be heavy and be sure to must take measures to prevent parts and screw them to the opposite side of the door.
  • Page 41 INSTALLATION INSTALLATION Replacing the hinges • Remove the lower right hinge by loosening its 2 screws and fix it to its slot at the upper left side. • Remove the hinge caps located at the other side where you will fix ATTENTION ATTENTION the hinges.
  • Page 42 INSTALLATION INSTALLATION • Remove the upper right hinge by loosening its 2 screws and fix it to • Attach the hinge slot caps removed from the left side to the hinge its slot at the lower left side. caps at the right side. ATTENTION ATTENTION...
  • Page 43 INSTALLATION INSTALLING THE REFRIGERATOR DOOR • Place the fridge inner door to the refrigerator and fix it with 4 ATTENTION screws. Need to purchase a part or accessory for your ZLINE product? Visit ZLINEparts.com, ZLINE's official parts distribution partner.
  • Page 44 2.0.0 zlinekitchen.com 1-614-777-5004 contact@zlinekitchen.com...

This manual is also suitable for:

Rbiv-36

Table of Contents