Reset Procedure - Alarm.Com Trinity Monitoring Wellcam Product Manual

WELLCAM™ SETUP FROM A MOBILE DEVICE
1. To add W ellcam to your W i - Fi network, log
in to the mobile app, tap the Navigation
Menu icon in the top left, tap the
Video option, tap the Settings icon in the
top r ight, and tap Add Video Device.
2. Follow the on- screen instructions to
add the camera to your account.
3. To set up your Recording Rules, tap
the Navigation Menu icon in the top
left, tap the Video option, tap the
Settings icon in the top r ight, tap
Recording Rules, and tap + Add
New Rule. W e recommend choosing
Video Analytics ( not available with
all service packages ).
HOW TO FACTORY RESET A WELLCAM™ TO ITS DEFAULT SETTING
I t is recommended that the device be powered on for at least two minutes before t rying to f actory
reset i t.
Important : I f the f actory reset is attempted immediately after power up i t will not work as the device will
still be rebooting. After perf orming a f actory reset, i t is strongly recommended to leave the device alone
and plugged into power for two minutes.

Reset Procedure:

1. Press the Menu button.
2. Use the Volume buttons to scroll to the
Factory Reset option.
3. Follow the audio prompts to initiate a
Factory Reset.
The camera will reboot with f actory def aults.
Trinity Wiring and Security Solutions
|
C o p y r i g h t © 2 0 1 9 A l a r m . c o m . A l l r i g h t s r e s e r v e d .
4. To set up the Call- out button, tap the
Navigation Menu icon in the top left, tap
Notif ications, switch on the Video Callout
Notif ication f eature, and tap on the box to
add recipients and activate W ellcam' s Call-
out button so loved ones can contact their
caregivers.
W ellcam™ Image:
pg4