8 Components of the Stud Welding Unit
8.4
Mains Switch
1 - Mains switch
The switch for mains mode is located on the rear of the stud welding unit. In switch
position "I", the LED
nates.
In switch position "0", the welding process can only be started via the bat-
tery. The battery is not charged in this switch position.
Use the "On/Off" button to switch on the stud welding unit.
26
1
for mains mode on the front of the stud welding unit illumi-
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
2
2 - "On/Off" button