Adjusting The Thyristor (Capacity Switch); 5.6.10 Adjusting The Gas Pre-Flow Time - HBS CDM 3201 Operating Manual

5.6.9

Adjusting the Thyristor (Capacity Switch)

With this menu item, you can select the level of welding energy via the capacity switch
of the power unit.
Two levels are available (800 Ws and 2400 Ws).
Press the arrow key
until the sign ">" is displayed
in front of "Thyristor".
⇒ with the Enter key
"Thyristor"
⇒ with
"Thyristor 1" or
"Thyristor 1 + 2"
With "Thyristor 1" you select 800 Ws, with "Thyristor 1 + 2" 2400 Ws are available.

5.6.10 Adjusting the Gas Pre-Flow Time

Option
CDM 3201 Order No. BA 92-12-3321A Issue 19.09.08
open menu item
or select
5 Stud Welding Procedure
5.6 Switching on the Power Unit
Gun Service
Reset >Thyristor
THYRISTOR-Mode
>Thyristor 1
THYRISTOR-Mode
> Thyristor 1 + 2
41