TCL MW45AD Quick Start Manual page 5

WPS key
Charging /
USB Port
Reset
Reboot
Power saving
mode
Hold "WPS" key for 3 seconds to activate
the WPS function. Once activated, the
Wi-Fi LED indicator will flash every two
seconds. If the network is not accessed
within 2 minutes device will automatically
exit WPS mode.
Use the USB jack to charge your device and
connect your device to the client via the
USB cable.
Hold both "Power" and "WPS" keys
simultaneously for 6 seconds. All LED
indicators will flash blue 4 times to indicate
that the device has been reset to factory
mode.
Hold "Power" key for 10 seconds to restart
device.
If no buttons are pressed for period of
30 seconds, all LED lights will turn off
automatically. Press any button, charge
device, or connect to computer, to turn on
LED lights again.
If no Wi-Fi is accessed for a period of
10 minutes,
automatically. Press any button, or access
the device, to turn on Wi-Fi again.
If no Wi-Fi is accessed for a period of 30
minutes, the Wi-Fi AP function will turn off
automatically. Press any button to turn on
Wi-Fi AP again.
EN - 5
network dialing ceases