Status Leds; Initial Operation; Remote Control; Power Supply - DURAVIT SensoWash Slim Operating Instructions Manual

> Press the lock of the "Battery Compartment"
> Insert two lithium batteries (CR2032) with + facing upwards.
> Close the "Battery Compartment"
EN

4.2 Status LEDs

Red illuminated: SensoWash
Green illumina-
ted:
Green flashing:
Red flashing:

5. Initial operation

Remote control

> Press the lock of the "Battery Compartment"
> Remove the foil safety tag in the battery compartment.
> Close the "Battery Compartment"

Power supply

> Connect the main power supply.
SensoWash
when it is connected to the power supply. During this time the
12
tions cannot be used.
SensoWash
can be used.
SensoWash
only „Power"
Malfunction. Disconnect main power supply
and proceed with chapter 9.
®
will start "Initialization" for about 15 seconds
.
8
®
is in the „Standby mode", all func-
® is in the „On mode", all functions
®
is in the „Initialization" process,
on the seat unit can work.
A
.
8
to open it.
8
to open it.
8