Table of Contents
Advertisement
Playback Connection
14
You can connect the camera to a TV or VCR in
order to play back your recordings. You will need to
attach a power source to the camera (see p. 7).
See your TV/VCR instruction manual for details.
1. Connect the camera to the TV (or VCR).
♦ Connect the camera using the optional PC-
270SST S-stereo SCART Cable. Connect the
white plug to the white audio terminal © (left).
Connect the red plug to the red audio terminal
® (right). Connect the S-video plug to the S-
video terminal ®.
Notes:
• If you are going to use the TV as a monitor while
you are shooting, remember to keep the TV
volume turned down as long as the camera's
AUDIO terminals are connected. If the sound
from the TV speakers is picked up by the
microphone, an unpleasant high-pitched squeal,
called feedback, may be produced.
• If you want a mono output, connect the cable to
the camera's left AUDIO terminal ©, but do not
connect the right AUDIO terminal ®. This will
give a combined mono output from both left and
right channels.
• The superior quality of Hi8 can best be
appreciated on a TV which has S-video input.
2. Set the TV/VIDEO selector on the
television to VIDEO.
3. If you are connecting the camera to a
VCR, set the input selector on the VCR
to LINE.
If your TV (or VCR) has a SCART terminal (S-video)
If your TV (or VCR) has a SCART terminal (without S-video)
1. Connect the PC-A10 SCART adapter to
the TV or VCR's SCART terminal.
2. Connect the camera to the adapter.
• Connect the camera using the STV-150
Stereo Video Cable. Connect the white plug to
the white audio terminal © (left). Connect the
red plug to the red audio terminal ® (right).
Connect the yellow plug to the yellow video
terminal ®.
3. Set the TV/VIDEO selector on the
television to VIDEO.
4. If you are connecting the camera to a
VCR, set the input selector on the VCR
to LINE.
Advertisement
Table of Contents
