Playback Connection
You can connect the camera to a TV or VCR in order to play back your recordings. You will need to attach
s
a power source to the camera (see p. 7).
If you are going to use the TV as a monitor while you are shooting, remember to keep the TV volume
turned down as long as the camera's AUDIO terminal is connected. If the sound from the TV speaker is
picked up by the microphone, an unpleasant high-pitched squeal, called feedback, may be produced.
If your TV (or VCR) has audio/video input terminals
1. Connect the camera to the TV (or VCR).
• Use the C-250 AV Cable. Connect the white plug to the white audio terminal. Connect the yellow plug
to the yellow video terminal.
2. Set the TV/VIDEO selector on the television to VIDEO.
3. If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.
• See your VCR instruction manual for details.
If your TV (or VCR) has a SCART terminal
1. Connect the PC-A10 SCART cable adapter to the TV or VCR's SCART terminal.
2. Connect the camera to the adapter.
• Use the C-250 AV Cable. Connect the white plug to the white audio terminal. Connect the yellow plug
to the yellow video terminal.
3. If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.
• See your VCR instruction manual for details.
16