Advertisement
Troubleshooting the FR6076 (Continued)
Table 7-1
Problem
FR6076 shuts off.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
A message appears
stating that the
FR6076 memory is
full.
FR6076 keeps
powering down to
protect memory
contents.
Cause
FR6076 is inactive.
The FR6076 turns off after a period of inactivity. If the FR6076 is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals. If the FR6076 is running on external power,
set this period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting
and tapping the
the setting for a longer delay before the automatic shutoff feature
activates.
Battery is depleted.
Replace the battery.
Battery is not
Insert the battery properly. See Installing the Main Battery on page
inserted properly.
1-6.
Screen is not
Re-calibrate the screen. See Calibrating the Screen on page 1-8.
calibrated correctly.
The system is not
Warm boot the system. See Resetting the FR6076 on page 2-14.
responding.
Too many files
Delete unused memos and records. If necessary, save these
stored on the
records on the host computer (or use an SD card for additional
FR6076.
memory).
Too many
Remove user-installed applications on the FR6076 to recover
applications
memory. Select
installed on the
Programs
FR6076.
The FR6076's
Recharge the battery.
battery is low.
The internal
Because this mode requires battery power, power it off when not
Bluetooth radio is
needed.
powered on for a
long time.
Maintenance & Troubleshooting
Solution
icon. Select the
Power
>
>
Start
Settings
System
icon. Select the unused program and tap Remove.
96
>
>
tab
Start
Settings
System
tab and change
Advanced
tab and tap the
Remove
Advertisement
