Table of Contents
Advertisement
Setting speaker channels
You can adjust the delay times (for center and
surround speakers only) and volume level for
individual speakers. These adjustments let you
optimize the sound of your system to best suit
your surroundings and setup.
IMPORTANT!
Press the SURR button on the remote
control to select the multi-channel surround
mode before adjusting the speaker settings.
1
Press 7 to stop playback, then press
SET UP.
2
Press 3 repeatedly to select [AUDIO SETUP
PAGE].
3
Press 5∞ to highlight [SPEAKER SETUP], then
press 3.
AUDIO SETUP PAGE
SPEAKER SETUP PAGE
4
Press 5∞ to select a language and press ENTER
(OK) to confirm.
5
Press 5∞ to highlight one of the options below,
then press 3.
To return to the previous menu, press 2.
TIPS:
To clear the menu, press SET UP.
Getting Started
[SPEAKERS VOLUME] – Volume level setting for
individual speakers (–6dB ~ +6dB).
SPEAKERS VOLUME SETUP
FRONT LEFT
FRONT RIGHT
CENTER
SUBWOOFER
SURROUND L
SURROUND R
[SPEAKERS DELAY] – Delay time settings is in
relation to the listening position/distance for center
and surround speakers (0MS ~ 15MS).
SPEAKERS DELAY SETUP
CENTER
SURROUND L
SURROUND R
6
Press 2 3 to adjust the setting that best suit your
surround sound needs.
7
Press ENTER (OK) to confirm.
Notes:
– Use a longer delay time settings when the surround
speakers are closer to the listener than the front
speakers.
– A test tone will be automatically generated to help
you judge the sound level of each speaker.
0dB
0dB
0dB
0dB
0dB
0dB
0 MS
0 MS
0 MS
21
Advertisement
Table of Contents
