Setting Speaker Channels - Yamaha DVX-S301 Owner's Manual

■ Setting speaker channels

You can adjust the delay times (for center and surround
speakers only) and volume level for individual speakers.
These adjustments let you optimize the sound of your system
to best suit your surroundings and setup.
Note
Press on the remote control to select the multi-
SURR
channel surround mode before adjusting the speaker settings.
1 Press s to stop playback, then press SET UP.
2 Press repeatedly to select [AUDIO SETUP PAGE].
3 Press / to highlight [SPEAKER SETUP],
then press .
AUDIO SETUP PAGE
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
SPEAKER SETUP PAGE
SPEAKERS VOLUME
SPEAKERS DELAY
4 Press / to highlight one of the options below,
then press .
[SPEAKER VOLUME] – Volume level setting for
individual speakers (–6dB to +6dB).
SPEAKER VOLUME SETUP
FRONT LEFT
FRONT RIGHT
CENTER
SUBWOOFER
SURROUND L
SURROUND R
[SPEAKERS DELAY] – Delay time settings is in
relation to the listening position/distance for center
and surround speakers (0 MS to 15 MS).
SPEAKER DELAY SETUP
CENTER
SURROUND L
SURROUND R
5 Press / to adjust the setting that best suit your
surround sound needs.
6 Press ENTER (OK) to confirm.
7 To return to the previous menu, press
To exit the menu, press SET UP.
Notes
– Use a longer delay time settings when the surround
speakers are closer to the listener than the front
speakers.
– A test tone will be automatically generated to help
you judge the sound level of each speaker.
GETTING STARTED
3
0dB
0dB
0dB
0dB
0dB
0dB
0 MS
0 MS
0 MS
.
27