Getting Started
Setting language preferences
You can select your preferred language settings so
that this receiver will automatically switch to your
preferred language for you whenever you load a
disc. If the language selected is not available on the
disc, the disc's default setting language will be used
instead. The OSD (on-screen display) language for
the system menu will remain as you set it,
regardless of various disc languages.
On-screen display (OSD) language
1
In DVD/CD mode, press SET UP.
2
Press 3 to select [GENERAL SETUP PAGE].
3
Press 5∞ to highlight [OSD LANGUAGE], then
press 3.
GENERAL SETUP PAGE
DVD AUDIO
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DiVX(R) VOD CODE
4
Press 5∞ to select a language and press ENTER
(OK) to confirm.
TIPS:
To return to the previous menu, press
To clear the menu, press SET UP.
20
ENGLISH
FRANÇAIS
ESPAÑOL
2
.
Audio, Subtitle and Disc menu
languages
1
Press 7 twice to stop playback (if any), then press
SET UP.
2
Press 3 repeatedly to select [PREFERENCE
PAGE].
3
Press 5∞ to highlight one of the options below at
a time, then press 3.
– [AUDIO] (disc's soundtrack)
– [SUBTITLE] (disc's subtitles)
– [DISC MENU] (disc's menu)
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DEFAULT
4
Press 5∞ to select a language and press ENTER
(OK) to confirm.
If the language you want is not in the list,
then select [OTHERS].
Use the numeric keypad (0-9) on the remote
control to enter the 4-digit language code 'XXXX'
(see "Language Codes" at the end of this manual)
and press ENTER (OK) to confirm.
5
3
4
Repeat steps
~
for other settings.
ENGLISH
CHINESE(SIMP)
FRENCH
SPANISH
PORTUGUESE
POLISH
ITALIAN
TURKISH